topic Re: morph projection in Modeling

morph projection

alemanda — Wed, 24 May 2023 17:27:53 GMT

Hi to all,
I have the following problem with the morph.
I made a morph on story 0
Heighest point of the morph is below the level of story 1.
I set the morps as projected on all the relevant stories.
I set the cut plane level
I can see correctly all the other elements except the morph.
I can see also the morph only if the heighest point of the morph is above the level of story 1.

Is it a bug.
Do I miss something?

Thanks

Re: morph projection

Anonymous — Thu, 20 Mar 2014 17:11:53 GMT

Try using "Home & One Story Up" instaed. "All Relevant Stories" works only when:

All Relevant Stories: The element will be shown and editable on all stories which it physically intersects.

See here for more detail.

Re: morph projection

alemanda — Thu, 20 Mar 2014 17:18:06 GMT

There's something strange.
Walls are set visible in all relevant floors and they are shown correctly even though they don't intersect the story.
See the picture above.

Re: morph projection

alemanda — Wed, 26 Mar 2014 14:37:54 GMT

... is it a normal behaviour of AC?

Re: morph projection

Laszlo Nagy — Fri, 28 Mar 2014 14:20:30 GMT

So to summarize it to anyone who is not getting deep into this thread:

You have a Morph and a Wall placed on Story 0.
They both have their Show on Stories option set to All Relevant Stories.
The top point of both is below the level of Story 1 so they do not intersect the level of Story 1.
You go to Story 1.
In the Floor Plane Cut Plane Dialog you set the Show Down to field to 1 Story Below. So in Story 1 you want to see elements placed on Story 0 (Story 0 is their Home Story).

The Wall will be visible on Story 1. The Morph will NOT be visible on Story 1 with the above settings.

One would assume that since the Morph is set to All Relevant Stories, and since the Floor Plane Cut Plane Dialog is set to show elements on 1 Story down, the Morph, being on Story 0, should show on Story 1, just as the Wall is shown.
But the Morph does not show.

I am going to report this to Graphisoft. Meanwhile, I think you should be using the solution alexwang32 has given you.

Re: morph projection

alemanda — Fri, 28 Mar 2014 14:54:55 GMT

Yes Laszlonagy
It is as per your point by point description.
It seems a bug ...
Thanks