https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155140#M83629 You could use a roof if you just need a sloped surface.<BR /> <BR /> If you want an actual RAMP object (via Stair Tool), you can do the following.<BR /> <BR /> 1. Draw a Fill on the floor plan around the perimeter of your intended ramp.<BR /> <BR /> 2. Draw a line from the starting edge to the ending edge.<BR /> <BR /> 3. Select both the fill and line, and go to Design &gt; <I></I><S><I><I></I></I></S>Create Stair Using Selection<E></E><BR /> <BR /> 4. Select the Ramp icon from the dialogue showing the different stair configurations.<BR /> <BR /> 5. Configure the Ramp's settings via Stairmaker. Wed, 20 Jun 2012 17:29:04 GMT SGraham_MGArchitects 2012-06-20T17:29:04Z https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155138#M83627 <DIV class="actalk-migrated-content"><T>Is it possible to make a trapezoidal ramp in archicad?<BR /> <BR /> thank you!</T></DIV><BR /><IMG src="http://community.graphisoft.com/t5/image/serverpage/image-id/68835i5F88C999FCAC8201/image-size/large?v=v2&amp;px=999" border="0" alt="ramp.png" title="ramp.png" /> Wed, 30 May 2012 18:36:14 GMT https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155138#M83627 Anonymous 2012-05-30T18:36:14Z https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155139#M83628 Yes. One way it to use the roof tool which is a sloped slab. In the plan view you can make it wedge shaped as you show. Wed, 30 May 2012 20:19:20 GMT https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155139#M83628 Erika Epstein 2012-05-30T20:19:20Z https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155140#M83629 You could use a roof if you just need a sloped surface.<BR /> <BR /> If you want an actual RAMP object (via Stair Tool), you can do the following.<BR /> <BR /> 1. Draw a Fill on the floor plan around the perimeter of your intended ramp.<BR /> <BR /> 2. Draw a line from the starting edge to the ending edge.<BR /> <BR /> 3. Select both the fill and line, and go to Design &gt; <I></I><S><I><I></I></I></S>Create Stair Using Selection<E></E><BR /> <BR /> 4. Select the Ramp icon from the dialogue showing the different stair configurations.<BR /> <BR /> 5. Configure the Ramp's settings via Stairmaker. Wed, 20 Jun 2012 17:29:04 GMT https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155140#M83629 SGraham_MGArchitects 2012-06-20T17:29:04Z https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155141#M83630 Thank you very much to both of you!<BR /> It was really helpful! Thu, 23 Aug 2012 01:28:12 GMT https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155141#M83630 Anonymous 2012-08-23T01:28:12Z https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155142#M83631 I've used complex profile to create ramps which can be edited easily. Fri, 24 Aug 2012 00:28:48 GMT https://community.graphisoft.com/t5/Modeling/Trapezoidal-Ramp/m-p/155142#M83631 Bob Moore 2012-08-24T00:28:48Z