topic Re: MESH in Modeling

MESH

Llian — Thu, 25 May 2023 15:06:43 GMT

i have xref cad file onto the building, created a mesh , magic wand on the contour lines, but nothing happens....what have i missed?

Re: MESH

Anonymous — Sun, 13 Jun 2010 00:34:38 GMT

The dialog indicates that a contour is created. You can chose to add points (create topo contour) or make a hole (boundary contour). Click OK.

Re: MESH

Llian — Sun, 13 Jun 2010 01:28:37 GMT

yes. i did click ok but nothing is showing the contour line which i am expecting to see couple of black dots which i have set in my magic wand setting to 1" segment

Re: MESH

Anonymous — Sun, 13 Jun 2010 01:53:39 GMT

If you "Placed" the drawing it may not be able to use the contours (don't know why you'd get the dialog in that case though.

As a test try drawing some lines/splines/arcs with ArchiCAD and try those.

Re: MESH

Llian — Sun, 13 Jun 2010 02:00:44 GMT

drew a line over the xref contour and nothing happens with magic wand and mesh tool. both the xref file and mesh is drawn on ground floor level .

Re: MESH

Anonymous — Sun, 13 Jun 2010 02:04:52 GMT

I'm just about stumped. I've never seen this fail that I can recall.

Try a random spline crossing the mesh. This should create multiple nodes.

Re: MESH

Llian — Sun, 13 Jun 2010 02:19:41 GMT

i deleted mesh and xref and re-re and drew a spline and this time it's showing the nodes on the spline. i am sure there is a way that i can magic wand on the cad contour lines without having to redraw the lines....

Re: MESH

Anonymous — Mon, 14 Jun 2010 22:26:30 GMT

open up the survey in a separate instance of AC, then copy & paste the contours into your file

Re: MESH

Llian — Thu, 17 Jun 2010 06:46:33 GMT

i had 2 bugs ;rebooted, re-re xref and yes it works but still can't figure out the mesh grading. this is my 10th time redrawing this simple building with 3 different levels [ garage 0.00, crawlspace -5.00' and basement -11' ]. the survey starts at 122.76' [south-west corner of the property line] to 142' [north-east corner of the property line]. the driveway bottom is approx at 123' and top of driveway is at garage 0.00...attaching 2 pictures.

Re: MESH

Llian — Thu, 17 Jun 2010 06:47:53 GMT

here's the model of the simple house with driveway and steps

Re: MESH

Llian — Thu, 17 Jun 2010 06:53:27 GMT

I have st levels as follows

Re: MESH

Llian — Thu, 17 Jun 2010 06:53:50 GMT

and