topic driveway on slope in Modeling

driveway on slope

Llian — Thu, 25 May 2023 15:06:40 GMT

any idea how to get that? any kind of sub-region on mesh to create the slope ?

Re: driveway on slope

Anonymous — Mon, 14 Jun 2010 21:29:54 GMT

not quite sure what you are trying to achieve, you can use the mesh tool to create a sloped driveway by creating the contours and setting elevations.

Re: driveway on slope

Steve Jepson — Tue, 15 Jun 2010 00:18:06 GMT

I use a roof for sloping driveways, sidewalks, and garage slab.

Re: driveway on slope

Anonymous — Tue, 15 Jun 2010 02:22:59 GMT

Read the last section in this article here:

http://www.aecbytes.com/tipsandtricks/2006/issue10-archicad.html

It covers the best way of creating a path/driveway that follows the contours of a mesh.

Re: driveway on slope

Anonymous — Tue, 15 Jun 2010 02:25:01 GMT

Read the last section in this article here:

http://www.aecbytes.com/tipsandtricks/2006/issue10-archicad.html

It covers the best way of creating a path/driveway that follows the contours of a mesh.

Re: driveway on slope

Llian — Mon, 21 Jun 2010 02:24:29 GMT

dwight showed me but i forgot how he did it..it was simple.
i looked through the website suggested below and it has been 3 hours that i still can't get the driveway slope to the mesh using the seo.

does the slab [driveway] has to be thicker than the mesh so when it's intersected it's showing before proceed to doing the 2nd SEO?

i've set the driveway to yellow and the mesh to earth for contrasting color. the first step after 'intersect', the slab goes hidden.....

Re: driveway on slope

Shaun C — Mon, 21 Jun 2010 09:03:38 GMT

Llian wrote:

dwight showed me but i forgot how he did it..it was simple.
i looked through the website suggested below and it has been 3 hours that i still can't get the driveway slope to the mesh using the seo.

does the slab [driveway] has to be thicker than the mesh so when it's intersected it's showing before proceed to doing the 2nd SEO?

i've set the driveway to yellow and the mesh to earth for contrasting color. the first step after 'intersect', the slab goes hidden.....

Ensure that the mesh is set to the "solid bodies" construction method. Solid Element Operations cannot be performed on surfaces - the elements must be solids.