How to create a roll off from a roof

Anonymous — Tue, 23 May 2023 12:41:22 GMT

I need to create a roll off from a roof,(the horizontal view with real dimensions of a sloped surface) for a real architectural model.

Please help.

Re: How to create a roll off from a roof

sinceV6 — Thu, 21 Jun 2012 16:10:16 GMT

You could use a 3D document:
1. select the roof you need
2. press F5 or menu view->elements in 3D view->show selection/marquee in 3D

you should have only that roof in 3D
3. make sure you are in axonometric view (ctrl-F3)
4. use the "look to perpendicular of clicked surface command" -either in toolbar or view->3D navigation extras
5. click the roof's top surface

you should now be looking at the real sloped surface
6. create a 3D document from this
7. use this 3D doc to place in layouts.

Hope this helps.
Best Regards.

topic Re: How to create a roll off from a roof in Modeling

How to create a roll off from a roof

Re: How to create a roll off from a roof