topic Re: archicad 12: Problem Inserting Doors in Modeling

archicad 12: Problem Inserting Doors

Anonymous — Thu, 25 May 2023 16:10:04 GMT

When I insert a door, it will not cut the wall opening or display the dor swing arch in 2-d. Any suggestions?

Re: archicad 12: Problem Inserting Doors

Link — Wed, 17 Sep 2008 21:06:14 GMT

Probably a Model View Option setting: Document> Set Model View> Model View Options... Check your Door Settings (and probably your Window Settings while you're there).

Cheers,
Link.

Re: archicad 12: Problem Inserting Doors

Anonymous — Wed, 17 Sep 2008 23:10:04 GMT

Link wrote:
Probably a Model View Option setting: Document> Set Model View> Model View Options... Check your Door Settings (and probably your Window Settings while you're there).

Cheers,
Link.

Thanks for the advice, but nothing i do seems to work. Where can i find the correct settings, or reset to the default settings?

Re: archicad 12: Problem Inserting Doors

Link — Wed, 17 Sep 2008 23:24:16 GMT

It may have something to do with your floor plan cut plane. Check the height of it, make sure it is around a meter or 3-4 feet. And check that the doors Floor Plan Display are set to Symbolic.

Cheers,
Link.

Re: archicad 12: Problem Inserting Doors

Anonymous — Fri, 19 Sep 2008 17:10:40 GMT

set doors to display symbolic, not projected (in the door settings)

Re: archicad 12: Problem Inserting Doors

Anonymous — Fri, 19 Sep 2008 21:01:43 GMT

xristina,
Once had something like this.
Turned out to be that I had story height
set to around one foot.
Bier