topic Re: How Can I Model This Rail in Modeling

How Can I Model This Rail

Anonymous — Tue, 23 May 2023 16:06:30 GMT

have a client who wants this handrail modeled into their job to see what it will look like (like the picture i say, not good enough.)

so the horizontal balusters, they want to be round bar, so i will just use a round complex profile with the wall tool, then curve the wall, and copy them above eachother, easy.

but im drawing a blank how to model the curved handrail on the top (see red arrow).
best i can find is in the library item - curved ramp 01. but this only allows me to do a square/rectangle rail. and i need a round one.. any hints to model it or a library item that i can use??
cheers

Re: How Can I Model This Rail

Anonymous — Wed, 17 Jul 2013 04:27:09 GMT

There is the Spiral object under Basic Shapes in the standard AC Library. You must be able to work out the sweep angle and radius of axis, the height of the spiral will be your floor to floor height. Use an SEO for the vertical cut at the bottom end of the rail.
The horizontal balusters could be the Elbow object from the same library, make one, Multiply in Rotate mode with vertical displacement.

Re: How Can I Model This Rail

Karl Ottenstein — Wed, 17 Jul 2013 14:59:08 GMT

GeNOS wrote:
have a client who wants this ...the horizontal balusters, they

I sure hope your client doesn't have children and/or children never visit a house with ladder-like balusters like that...

Re: How Can I Model This Rail

Eduardo Rolon — Wed, 17 Jul 2013 16:54:35 GMT

What I would do is use a curved beam with a complex profile to define the arc .

Convert it to morph.

Select the end plane and move it in the Z coordinate.

Re: How Can I Model This Rail

Eduardo Rolon — Wed, 17 Jul 2013 16:55:01 GMT

Edit Morph

Re: How Can I Model This Rail

Eduardo Rolon — Wed, 17 Jul 2013 16:55:31 GMT

result

Re: How Can I Model This Rail

Anonymous — Wed, 17 Jul 2013 20:38:06 GMT

Karl wrote:
GeNOS wrote:
have a client who wants this ...the horizontal balusters, they
I sure hope your client doesn't have children and/or children never visit a house with ladder-like balusters like that...

That would be great fun! (Boo the Stair Police)

ejrolon wrote:
What I would do is use a curved beam with a complex profile to define the arc .

Convert it to morph.

Select the end plane and move it in the Z coordinate.

If GeNOS's signature is still up to date, no Morph tool in AC14

Re: How Can I Model This Rail

Eduardo Rolon — Wed, 17 Jul 2013 20:40:38 GMT

s2art wrote:
…
If GeNOS's signature is still up to date, no Morph tool in AC14

Oops.

Re: How Can I Model This Rail

Anonymous — Thu, 18 Jul 2013 00:38:48 GMT

s2art wrote:
There is the Spiral object under Basic Shapes in the standard AC Library. You must be able to work out the sweep angle and radius of axis, the height of the spiral will be your floor to floor height. Use an SEO for the vertical cut at the bottom end of the rail.
The horizontal balusters could be the Elbow object from the same library, make one, Multiply in Rotate mode with vertical displacement.

perfect, that might be the easiest option. i tired searching the library but unless you know a keyword there would be dozens of items you would never see.

ejrolon
ill give this ago.. iv not used the morph tools yet. ill have a play with it.

s2art
iv got 15 and 16, but still using 14 . i was gonna change over to 16 recently, but thought id wait till 17 comes out.. which we should be receiving them the post very soon im hoping.

Re: How Can I Model This Rail

Anonymous — Wed, 31 Jul 2013 22:11:24 GMT

Visit Olivier Dentan's ArchiLIB OD page:
http://archilib.od.pagesperso-orange.fr/

Olivier's spiral solution (ramps/courbes) will probably fit your needs (AC14).