topic Re: Cabinet object visibility in elevation is not showing up in Modeling

Cabinet object visibility in elevation is not showing up?

rob2218 — Tue, 23 May 2023 14:45:12 GMT

Section thru building.
interior elevation object (cabinet object) is not in section.
countertop is somehow not "visible" in section/elevation view.
neither is bottom toe kick base plate area (in red).
what gives?

Re: Cabinet object visibility in elevation is not showing up

rob2218 — Fri, 18 Feb 2011 20:25:57 GMT

here's the section in full.
as you can see...the cabinet countertop portion of the object doesn't
show up in the elevation. Remember cabinet object is "NOT" in section.

Re: Cabinet object visibility in elevation is not showing up

rob2218 — Fri, 18 Feb 2011 20:52:31 GMT

ISSUE RESOLVED.
see attached JPG explaining what "button" does shut off the "3d edge visibility".

Posting this resolution on the problem I had for all other users who are having the same issue and haven't figured out yet why what causes what....

Re: Cabinet object visibility in elevation is not showing up

Anonymous — Wed, 19 Sep 2018 19:15:22 GMT

rob2218 wrote:
ISSUE RESOLVED.
see attached JPG explaining what "button" does shut off the "3d edge visibility".

Posting this resolution on the problem I had for all other users who are having the same issue and haven't figured out yet why what causes what....

It's stil invisible (in Section View) if countertop is rounded.
Any thoughts what to do?