topic Re: Is it possible to create Slanted Curved wall?? in Modeling

Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 12:54:07 GMT

So... 🙂

Re: Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 13:14:14 GMT

Yes, Very easily thanks!

Re: Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 13:20:27 GMT

How can I enter Slant Angle?

Re: Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 13:27:45 GMT

Either in the settings dialog box, or directly in 3D into the tracker box that pops up when you click on a node.

Re: Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 13:28:02 GMT

I can't choose angle

Re: Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 13:37:07 GMT

Try Suspend Groups and make sure you have only one wall 'segment' selected.

You may find the wall has split into several curved segments if you magic wanded a spline, for example, so you may have to adjust each segment separately.

Re: Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 13:46:04 GMT

Ahh, you didn't say you were in AC10 did you!!! (Put it in your sig!)

Proper curved slanted wall were only introduced in AC11. This thread discusses possible workarounds in AC10.

http://archicad-talk.graphisoft.com/viewtopic.php?t=14873&postdays=0&postorder=asc&highlight=curved+slanted+wall&&start=0

Hope that helps!

Re: Is it possible to create Slanted Curved wall??

Anonymous — Fri, 24 Aug 2007 17:40:26 GMT

OK... Tnx anyway 🙂 I'll get 11 next week, maybe it's the best solution

Re: Is it possible to create Slanted Curved wall??

Rod Jurich — Mon, 27 Aug 2007 02:42:52 GMT

Scrat wrote:
/.... maybe it's the best solution

Only solution!

Re: Is it possible to create Slanted Curved wall??

Dwight — Mon, 27 Aug 2007 04:17:13 GMT

NOT AT ALL!

I made curved, non-vertical walls in AC 10 by magic-wanding arcs or splines using a very small magic wand segment length. This, with a custom profile and - uh, was it the wall tool or the beam tool????

Attached is a composition using the technique with some SEO fun - wall segment stands alone as an example.

Re: Is it possible to create Slanted Curved wall??

Anonymous — Mon, 27 Aug 2007 06:06:17 GMT

Dwight wrote:
NOT AT ALL!

I made curved, non-vertical walls in AC 10 by magic-wanding arcs or splines using a very small magic wand segment length. This, with a custom profile and - uh, was it the wall tool or the beam tool????

Attached is a composition using the technique with some SEO fun - wall segment stands alone as an example.

No, I need perfect curved wall but this is nice wall too

Rod wrote:
Only solution!

Like Dwight did, it's possible to merge simple walls into almost curved 🙂 That's why I said it's "maybe the best solution"

Re: Is it possible to create Slanted Curved wall??

Anonymous — Mon, 27 Aug 2007 12:04:48 GMT

Dwight wrote:
NOT AT ALL!

I made curved, non-vertical walls in AC 10 by magic-wanding arcs or splines using a very small magic wand segment length. This, with a custom profile and - uh, was it the wall tool or the beam tool????

Attached is a composition using the technique with some SEO fun - wall segment stands alone as an example.

One simple problem with your solution is with openings. and this object needs huge CPU-power.

Re: Is it possible to create Slanted Curved wall??

Djordje — Mon, 27 Aug 2007 15:33:17 GMT

Dwight,

Could you reduce the images a bit? Please?

Re: Is it possible to create Slanted Curved wall??

Dwight — Mon, 27 Aug 2007 15:33:39 GMT

Sure. But not much more than they do in Archicad 11.

Curves is curves.