https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184027#M99681 The way i've dealt with this situation in the past is to use two section lines (with one head showing only at the 'outside' ends and placing them so that the internal ends meet. They can't have the same ID, so i named them something like A and A1, but then changed the text in A1 to custom text 'A'.<BR /> <BR /> I then placed both generated sections in the layout next to each other.<BR /> <BR /> I last did this before the Trace tool was available (seems like a looooong time ago), so i may even have had to cut and paste between the two section windows to co-ordinate notes/dimensions etc. Using the Trace tool, it should be much easier to do this. Thu, 29 Sep 2011 02:02:31 GMT Anonymous 2011-09-29T02:02:31Z https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184024#M99678 <DIV class="actalk-migrated-content"><T>Hi all,<BR /> <BR /> I am trying to creating a section with an angle in it, not stepped?<BR /> <BR /> THanks</T></DIV> Wed, 28 Sep 2011 20:52:45 GMT https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184024#M99678 Anonymous 2011-09-28T20:52:45Z https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184025#M99679 NO way to do it! Wed, 28 Sep 2011 21:31:23 GMT https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184025#M99679 Anonymous 2011-09-28T21:31:23Z https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184026#M99680 The closest you will be able to get to this is to use separate section lines (one of them on an angle) and then join the drawings together on a layout page.<BR /> Barry. Thu, 29 Sep 2011 01:51:29 GMT https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184026#M99680 Barry Kelly 2011-09-29T01:51:29Z https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184027#M99681 The way i've dealt with this situation in the past is to use two section lines (with one head showing only at the 'outside' ends and placing them so that the internal ends meet. They can't have the same ID, so i named them something like A and A1, but then changed the text in A1 to custom text 'A'.<BR /> <BR /> I then placed both generated sections in the layout next to each other.<BR /> <BR /> I last did this before the Trace tool was available (seems like a looooong time ago), so i may even have had to cut and paste between the two section windows to co-ordinate notes/dimensions etc. Using the Trace tool, it should be much easier to do this. Thu, 29 Sep 2011 02:02:31 GMT https://community.graphisoft.com/t5/Modeling/Creating-an-angle-section-line/m-p/184027#M99681 Anonymous 2011-09-29T02:02:31Z