topic Re: strange cuts going through wall ? in Modeling

strange cuts going through wall ?

Anonymous — Wed, 24 May 2023 11:04:00 GMT

i have an internal wall inside my house.
about 3 meters a´way there is a complex profile beam (gutter)
the gutter does not go any where near this internal wall.
But what ever i do, there is the profile cut of my gutter cutting straight through the wall ?
any ideas how to remove this little problem.

thanks.
Ian

strange cuts going through wall ?

Anonymous — Thu, 29 Sep 2011 08:49:29 GMT

Re: strange cuts going through wall ?

Barry Kelly — Thu, 29 Sep 2011 09:34:02 GMT

If the wall and the gutter aren't touching then they shouldn't interact with each other.
Turn all your layers on and see if there is another gutter lurking about.
Barry.

Re: strange cuts going through wall ?

Anonymous — Thu, 29 Sep 2011 12:12:55 GMT

Hi Barry.
your right, i turned on all the layers and then found 2 pieces of gutter walking through my walls.
funny enough in 3d, it never showed the gutters going near the walls but on plan, the end point of the gutter was to long and strectjing through the wall.

thanks barry for the help.
Ian

Re: strange cuts going through wall ?

Anonymous — Thu, 29 Sep 2011 12:32:18 GMT

weird, i have just spotted that a few new posts on the forum have been double posted. multiplied ??

just seems to have been a kickup with the server maybe ?
Ian

Re: strange cuts going through wall ?

vfrontiers — Thu, 29 Sep 2011 16:44:17 GMT

It must be your profile... Is it drawn as a BEAM... beam to wall cuts are brutal... Make sure gutter is on separate layer with different PRIORITY number....