topic Re: Moving Interior Elevation Markers to a New Layer in Documentation

Moving Interior Elevation Markers to a New Layer

Anonymous — Tue, 23 May 2023 01:11:29 GMT

I am working on a project the has all of the interior elevation markers shown on one particular layer. I would like to separate the standard interior elevation markers from the ones that I want on the enlarged plans. When I select any of the interior elevation markers the layer setting is greyed out and will not let me move the marker to a different layer. I do not know if this was set-up this way be the previous person working on the project (who is no longer with this employer) or not. Can you have interior elevation markers on separate layers?

Re: Moving Interior Elevation Markers to a New Layer

Stress Co_ — Thu, 07 Feb 2013 16:02:28 GMT

Either the "Layer" or the "section marker" itself are "locked" (or both).

If you turn "tracker" on (it's in your "work environment" settings) .... and hover over the marker, it will tell you.

Unlock... and you will be able to change the layer.

Re: Moving Interior Elevation Markers to a New Layer

Anonymous — Thu, 07 Feb 2013 20:22:44 GMT

I don't know if you can see it or not but both Layer and Marker are not locked, yet the layer setting is grey.

How do you upload a screen shot?

Re: Moving Interior Elevation Markers to a New Layer

Stress Co_ — Thu, 07 Feb 2013 20:34:15 GMT

"Choose File" (not "add attachment")
Note the file types and size requirements.

Re: Moving Interior Elevation Markers to a New Layer

Anonymous — Thu, 07 Feb 2013 20:45:07 GMT

Added the screen shot to my previous post.

Re: Moving Interior Elevation Markers to a New Layer

Anonymous — Thu, 07 Feb 2013 20:54:22 GMT

From another thread HERE...

Barry wrote:
You need to select the whole group of interior elevations and not just the individual elevation to be able to change the layer.
Barry.

Re: Moving Interior Elevation Markers to a New Layer

Stress Co_ — Thu, 07 Feb 2013 20:59:47 GMT

...and you have to select them all at the same time.
So it lists as 1 selected item.

Re: Moving Interior Elevation Markers to a New Layer

Anonymous — Thu, 07 Feb 2013 22:07:13 GMT

I was able to move all of them to another layer. I still cannot move the ones that I only want show up on the enlarged plans to their own separate layer.

Re: Moving Interior Elevation Markers to a New Layer

David Maudlin — Fri, 08 Feb 2013 14:43:24 GMT

Brian:

Try selecting the marker you want to use at the end of the Limit Line (the line that runs along the face of the wall), not the Marker itself or the line that runs through the marker. This will be easier to see if you activate the On-Screen Display Option: Marker Range.

David

Re: Moving Interior Elevation Markers to a New Layer

Anonymous — Fri, 08 Feb 2013 15:49:01 GMT

I tried selecting all of the points one at a time and nothing allows me to change the layer. I am beginning to think there is a setting somewhere that need to be deselected that gives individual control to the Interior Elevation Markers.

Re: Moving Interior Elevation Markers to a New Layer

Barry Kelly — Mon, 11 Feb 2013 00:33:02 GMT

Interior Elevations that are placed as a group can't have separate layers.
The whole group belongs to a single layer.
You will have to place separate Interior Elevation (or just use the Section or Elevation tool).
Barry.

Re: Moving Interior Elevation Markers to a New Layer

Da3dalus — Tue, 19 Mar 2013 00:08:10 GMT

I think it's even more complex than that. I had a SINGLE elevation marker that I put on the wrong layer. It's not in a group at all, and the layer settings were still greyed out. Here's what I found after clicking randomly:

1. It's best to activate the Interior Elevation Tool and select the marker. The layer is no longer greyed out, and you can change it, but changing it does NOT stick!
2. In addition, use the Edit Selection Set dialog (Opt-Cmd-T) to change the layer. This seems to work.
3. While shift-clicking wildly, I got it to select correctly once, but I don't know what I did. There may be another way.

Feature? Bug? I don't know.

Re: Moving Interior Elevation Markers to a New Layer

Barry Kelly — Tue, 19 Mar 2013 01:42:36 GMT

You have to select the extents of the interior elevation and not the marker or elevation line.
Selecting the extents the layer will be editable.
The same applies for when you want to edit the ID or name or show on storey.

Barry

Re: Moving Interior Elevation Markers to a New Layer

David Maudlin — Tue, 19 Mar 2013 12:27:19 GMT

Another screen shot to reinforce Barry's advice.

David

Re: Moving Interior Elevation Markers to a New Layer

Anonymous — Wed, 19 Aug 2015 15:51:57 GMT

I'm in version 19... And frustrated as hell with this bug once again. It doesn't ungray the layer.. no matter which point I select. Tried everything here. Clearly this tool is buggy and the interface for changing interior elevation layers is a best poorly designed. This should be a non-issue. I don't see people coming on the forums to try to figure out how to change the layer of any other tool..

Fix this already ArchiCad

Re: Moving Interior Elevation Markers to a New Layer

Barry Kelly — Thu, 20 Aug 2015 02:09:47 GMT

Yes this tool has changed again in 19 (and 18 apparently as well) and you now need to select the end of the boundary lines instead of the line itself.
I'm not sure exactly what it is all about as I don't use them myself.

Barry.

Re: Moving Interior Elevation Markers to a New Layer

Barry Kelly — Thu, 20 Aug 2015 02:16:25 GMT

I notice also if you can separate the elevation extent line from the elevation boundary line then you can still select anywhere on the boundary line and be able to change the layer.

Rather than separating these lines you can make the elevation infinite rather than limited and this allows you to select the elevation boundary.
You can always change it back afterwards.

Barry.

Re: Moving Interior Elevation Markers to a New Layer

rob2218 — Fri, 21 Aug 2015 02:22:32 GMT

Allz I can say is "What a freakin' disaster these interior elevation markers people".

They NEED to behave JUST like any other "elevation" or "section" marker............PERIOD!
that's what they are......just merely INTERIOR section and elevations...just shorter...............what is wrong here!

Why can't these markers get fixed for Petes Sake!

Re: Moving Interior Elevation Markers to a New Layer

Katalin Borszeki — Mon, 07 Sep 2015 12:37:29 GMT

Hi,

The full Interior Elevation Group needs to be on the same layer, so if you choose only one segment, the Layer-chooser pop-up is grey. You can only change Layers, when the full group is selected.

Selecting all of the segments is not the same as selecting the group. If the visibility-limitation distance line is under the dashed line, selecting with the Arrow tool means the following (and this didn’t change from ARCHICAD 18 to 19):
- Click on the corners: the group is selected;
- Click on the line (which is covered by the dashed line); one segment is selected.

If you select the dashed line, the full group will be selected and if you change the layer here, all of the segments will be on the new layer.
Best,

Re: Moving Interior Elevation Markers to a New Layer

rob2218 — Mon, 07 Sep 2015 17:34:30 GMT

thank you for your explanation.
still don't understand "why" it's not like the other elevation markers but ok.....I can accept that.

thank you.