topic Re: Disapearing Elevations in Documentation

Disapearing Elevations

Anonymous — Tue, 23 May 2023 01:13:20 GMT

I was projecting an elevation this morning, then had to change one thing. After that, the elevation came up blank, as did 7 out of 8 of my elevations. Just in case my change was the problem, I got the back-up file from before, which had projected the elevation fine just an hour before, and tried again. Blanks all around, even though it was the unaltered file and should not behave differently.

However, one elevation consistently projected, with no difference in settings that I could detect between those that did not, so the file was capable of producing elevations.

I tried all the usual things, re-starting the server, archiCAD the computer, etc. Even tried on three different machines--no difference.

Can anyone help?

Re: Disapearing Elevations

Anonymous — Sun, 22 Nov 2009 21:31:52 GMT

I guess you can consider the data lost in case you don't have a backup. It might have something to do with hardware issues (damaged memory card) or a not up-to-date ArchiCAD.

Good luck . . .

Re: Disapearing Elevations

Erika Epstein — Sun, 22 Nov 2009 21:33:13 GMT

By any chance did you select the problematic section markers and change their setting to zero depth or something else that might cause the sections not to be cutting through the model?

Re: Disapearing Elevations

Laszlo Nagy — Mon, 23 Nov 2009 19:57:01 GMT

If you create another brand new Elevation at the same place as one of your Elevations, does that work correctly? Because if it does the problem may be in the Elevation Settings.