https://community.graphisoft.com/t5/Documentation/Generating-sections/m-p/156159#M23831 The dialog box shows infinite for both Horiz and Vert ranges and All for show on stories. Status is Auto rebuild. The only way out I have found is by opening up a drawing that has an auto build section that works and paste my drawing into it... Tue, 09 Aug 2011 08:46:20 GMT Anonymous 2011-08-09T08:46:20Z https://community.graphisoft.com/t5/Documentation/Generating-sections/m-p/156157#M23829 <DIV class="actalk-migrated-content"><T>When generating a cross section in Archicad 12 all I hear is a 'ding' and a blank page in the section window. No generated section. What am I doing wrong. Thanks..</T></DIV> Tue, 30 May 2023 10:28:27 GMT https://community.graphisoft.com/t5/Documentation/Generating-sections/m-p/156157#M23829 Anonymous 2023-05-30T10:28:27Z https://community.graphisoft.com/t5/Documentation/Generating-sections/m-p/156158#M23830 have you checked the horizontal and vertical range settings in the section dialog box? Tue, 09 Aug 2011 08:01:12 GMT https://community.graphisoft.com/t5/Documentation/Generating-sections/m-p/156158#M23830 Anonymous 2011-08-09T08:01:12Z https://community.graphisoft.com/t5/Documentation/Generating-sections/m-p/156159#M23831 The dialog box shows infinite for both Horiz and Vert ranges and All for show on stories. Status is Auto rebuild. The only way out I have found is by opening up a drawing that has an auto build section that works and paste my drawing into it... Tue, 09 Aug 2011 08:46:20 GMT https://community.graphisoft.com/t5/Documentation/Generating-sections/m-p/156159#M23831 Anonymous 2011-08-09T08:46:20Z