topic Re: Can't amend renovation status in viewset created from de in Documentation

Can't amend renovation status in viewset created from detail

Anonymous — Tue, 09 May 2023 11:25:58 GMT

I am not able to amend the renovation status of a viewset created from a detail. I don't understand why? See attached, yellow exclamation mark.

I have made sure I have the viewset reserved.

Re: Can't amend renovation status in viewset created from de

David Maudlin — Tue, 15 Nov 2011 13:09:08 GMT

Dan:

When the Detail is the front window and I change the Renovation Filter I get this Warning, which explains the situation.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.

David

Re: Can't amend renovation status in viewset created from de

Anonymous — Tue, 15 Nov 2011 14:01:38 GMT

David,

Thank you for your reply. That explains it.
I have also taken your advice and amended my signature for the future.

Thanks again.

Dan.

Re: Can't amend renovation status in viewset created from de

Geof Gainer — Wed, 08 Feb 2012 19:02:07 GMT

I don't get it -- I can't make my detail's renovation filter stick:

1. In plan view, with renovation: Planned Status on, I place a detail marker.
2. I open the detail, and renovation: Existing Plan is on.
3. I switch to renovation: Planned Status, see the rebuild warning, and click "Change Anyway".
4. I hit "Rebuild from Source View" and the detail looks as it should.
5. Now in the Navigator, I select the detail, click Settings, and see the same yellow warnings Dan got. I tried hitting "Get Current Window's Settings", but when I click OK, it's reverted to renovation: Existing Plan again. No difference when I place the detail on a layout -- it's still on Existing Plan.

How do I make the renovation filter stick?

Re: Can't amend renovation status in viewset created from de

Anonymous — Tue, 01 Oct 2013 07:40:12 GMT

I'm having the same problem that Geof has (or had if if found the solution for it in the meanwhile)

...did you???

Re: Can't amend renovation status in viewset created from de

Geof Gainer — Tue, 01 Oct 2013 15:23:50 GMT

No, still dealing with it. My work around is to select all after the detail looks as it should, then hit Rennov: New, then Rennov: Existing, and save settings. Then when I double click the detail in Navigator it pops up in existing mode, but with all new stuff too, and I just flesh out the detail in existing mode as though it were new. Follow?

Yes it's a pain. Don't know why it does this. But I assume we'd be hearing from more people if everyone had the problem? I'll have to see if the problem's still there in AC17.

Re: Can't amend renovation status in viewset created from de

Anonymous — Tue, 01 Oct 2013 22:37:08 GMT

Not sure I got your work around. At this stage I just tagged those elements I needed documented as existing cos I have a deadline >.<

Finger crossed, AC17 will have this solved?!

Re: Can't amend renovation status in viewset created from de

Eduardo Rolon — Wed, 02 Oct 2013 16:56:34 GMT

Having the same problem with Patches. Cannot Edit Reno Status.

Re: Can't amend renovation status in viewset created from de

Anonymous — Fri, 06 Dec 2013 16:50:07 GMT

Ok not sure if this will fix your problem or not, but I believe that in the "view map" - "details" - settings, the overall settings for all the sublisted details not the individual detail view settings, you can set the renovation status and it will apply to all the sublisted details. If you would like both demo and new details, then you will have to use the clone a folder option to create a new sublisted set of details (kind of like the difference between floor plans and reflected ceiling plans) and in that new folders settings, set the other renovation filter you would like to use.

Re: Can't amend renovation status in viewset created from de

David Maudlin — Sat, 07 Dec 2013 14:28:10 GMT

ahoopes:

Good catch. Works here for a Clone Folder (a regular View Map Folder does not have any Settings).

David

Re: Can't amend renovation status in viewset created from de

Anonymous — Tue, 06 Jan 2015 22:04:51 GMT

Hi all, only noticed this myself now. Is it a bug or am I missing something? Anyone resolve it since, besides cloning the folder? Thanks

Re: Can't amend renovation status in viewset created from detail

Luca Kornelia Kosa — Sun, 17 May 2020 23:34:50 GMT

Sorry guys, where's this setting?
"view map" - "details" - settings, the overall settings for all the sublisted details
I don't seem to find this.

Thank you!

Re: Can't amend renovation status in viewset created from detail

Josh Crossin — Sat, 07 May 2022 02:42:57 GMT

We found the below workaround to work.

Open Organiser,
Select (double click) the detail in the Project Map,
Change the Renovation Settings to desired filter (Planned Development / New)
Select the Clone Folder in the View Map and select Details. The settings will match the view setting updated in step 3.
The View Map now has the updated Renovation Filter Settings.
Refer below screen shots,

Re: Can't amend renovation status in viewset created from detail

cs_ryl — Fri, 03 Mar 2023 00:12:21 GMT

Appreciate the efforts as shown above, but it doesn't resolve the issue when everything is already put on a sheet. All these linked sheets will then have to be manually relinked, which can be a nightmare if there are simply just too many!

It's laughable how this issue was discovered back in 2011, but still not resolved yet in 2023.

Re: Can't amend renovation status in viewset created from detail

Nic Tulban — Sat, 15 Apr 2023 15:11:20 GMT

it simply doesn't work. After 12 years.
I have to draw by hand... after 5h working and 3h looking for a solution.

Kínos.

Re: Can't amend renovation status in viewset created from detail

DGSketcher — Sat, 15 Apr 2023 15:57:29 GMT

Add that Details destroy all the 3D data links and you have my reason for not using them. These days I work with (LIVE) sections, but the downside it is a pain to add aligned linked marks on the full section. Details need a major rebuild.

Re: Can't amend renovation status in viewset created from detail

Nic Tulban — Sat, 15 Apr 2023 16:48:27 GMT

Palliative solution: Copy/Paste the detail in a Worksheet.

There it is possible to change the Renovation Status and it works.

Re: Can't amend renovation status in viewset created from detail

Nader Belal — Mon, 31 Jul 2023 08:05:42 GMT

I´m with @DGSketcher , the Detail tool with the Renovation filter is simply broken

Re: Can't amend renovation status in viewset created from detail

DGSketcher — Mon, 31 Jul 2023 09:58:59 GMT

I just noticed the views on this thread 13800+ !!! That should really be ringing alarm bells with GS.

Re: Can't amend renovation status in viewset created from detail

Kalib Stewart — Fri, 25 Oct 2024 03:22:59 GMT

Is this still not fixed...?