topic Re: Using fill pattern on interior elevations in Documentation

Using fill pattern on interior elevations

Anonymous — Tue, 23 May 2023 01:13:46 GMT

I was wondering if anyone has found a way to use the "fill" pattern on an interior elevation. Say you have a wall with several windows and you want to do a wainscot so that the bottom of the windows project thru. Is this even doable. I've researched but found no related subjects.....
Thanks

Re: Using fill pattern on interior elevations

Erika Epstein — Tue, 07 Apr 2009 03:57:56 GMT

You must place a zone in the room/area for the Interior Wizard to work. Select the zone and
Design>Design Extras> Interior Wizard
Set which interior mill work trim pieces you want.(You can save a favorite if you will be using this method on multiple rooms/spaces).

The interior wizard will place the woodwork on the wall but not where there are openings such as windows and doors.

Re: Using fill pattern on interior elevations

Anonymous — Tue, 07 Apr 2009 12:56:50 GMT

Thanks Erika for your response. I've tried setting a Zone in the space and while it is highlighted did the Design>Design Extra but do not have Interior Wizard in the menu. Am I missing something??

Re: Using fill pattern on interior elevations

Erika Epstein — Tue, 07 Apr 2009 13:09:32 GMT

sounds like you may not have downloaded and installed yourhave your Goodies.
With archicad open, go to the Help menu
Help>Archicad 12 Goodies
Down load and install, there are about a dozen. Follow the instructions. Once installed, when archicad has an update they will automatically be updated.

Re: Using fill pattern on interior elevations

Anonymous — Tue, 07 Apr 2009 14:21:21 GMT

Thanks Erika, I'll do that, appreciate your help