https://community.graphisoft.com/t5/Documentation/Cover-Fill-Overrides-not-working-correctly/m-p/236301#M35747 Select the placed Drawing on the Layout, right-click and select the Open Source View command to go to its source View. Does that show those Fills correctly? <BR /> If no, then there is a problem, maybe a bug.<BR /> If yes, then the View you think is the source View of the Drawing on the Layout is not its source View.<BR /> <BR /> You can also try the following: create the MVO settings, save them under a new name. Then set the Section/Elevation Settings properly, save the View and place it on a Layout as a Drawing. If this works there may be some problem with those placed Drawings and you might have to delete them and place new ones that work. That may be file related.<BR /> <BR /> You could also check whether it is file-related that you create a new file with New &amp; Reset and save the View and place it as a Drawing on a Layout there. If that works, then this issue may be specific to your Template file. Mon, 12 Jan 2015 13:45:21 GMT Laszlo Nagy 2015-01-12T13:45:21Z https://community.graphisoft.com/t5/Documentation/Cover-Fill-Overrides-not-working-correctly/m-p/236300#M35746 <DIV class="actalk-migrated-content"><T>I have been readjusting our template, but more specifically to the problem is the incorrect display of fills on the layouts even though it shows correctly in the view. Attached is a pdf showing where the issues are occurring. Every location that points out that the fill shows up incorrectly is properly shown in the view window, but when it goes on a layout (tested the print as well) the fills show up. This shouldn't be happening. Can someone please advise. None of the drawing settings on the Layout should affect this issue.</T></DIV> Fri, 19 May 2023 20:12:46 GMT https://community.graphisoft.com/t5/Documentation/Cover-Fill-Overrides-not-working-correctly/m-p/236300#M35746 Anonymous 2023-05-19T20:12:46Z https://community.graphisoft.com/t5/Documentation/Cover-Fill-Overrides-not-working-correctly/m-p/236301#M35747 Select the placed Drawing on the Layout, right-click and select the Open Source View command to go to its source View. Does that show those Fills correctly? <BR /> If no, then there is a problem, maybe a bug.<BR /> If yes, then the View you think is the source View of the Drawing on the Layout is not its source View.<BR /> <BR /> You can also try the following: create the MVO settings, save them under a new name. Then set the Section/Elevation Settings properly, save the View and place it on a Layout as a Drawing. If this works there may be some problem with those placed Drawings and you might have to delete them and place new ones that work. That may be file related.<BR /> <BR /> You could also check whether it is file-related that you create a new file with New &amp; Reset and save the View and place it as a Drawing on a Layout there. If that works, then this issue may be specific to your Template file. Mon, 12 Jan 2015 13:45:21 GMT https://community.graphisoft.com/t5/Documentation/Cover-Fill-Overrides-not-working-correctly/m-p/236301#M35747 Laszlo Nagy 2015-01-12T13:45:21Z