https://community.graphisoft.com/t5/Documentation/Elevation-drawing-board-objects-disappear-out-of-frame/m-p/239445#M36438 <DIV class="actalk-migrated-content"><T>In my elevation view I don't have a frame. and it looks like if I drag an object to far up I it disappears. I have set project 0 to 0, and my sea level is at 20 000mm for some reason. which meant that everything I have drawn at 70 000mm above project 0 disappears in my elevation view</T></DIV> Tue, 23 May 2023 01:05:29 GMT Anonymous 2023-05-23T01:05:29Z https://community.graphisoft.com/t5/Documentation/Elevation-drawing-board-objects-disappear-out-of-frame/m-p/239445#M36438 <DIV class="actalk-migrated-content"><T>In my elevation view I don't have a frame. and it looks like if I drag an object to far up I it disappears. I have set project 0 to 0, and my sea level is at 20 000mm for some reason. which meant that everything I have drawn at 70 000mm above project 0 disappears in my elevation view</T></DIV> Tue, 23 May 2023 01:05:29 GMT https://community.graphisoft.com/t5/Documentation/Elevation-drawing-board-objects-disappear-out-of-frame/m-p/239445#M36438 Anonymous 2023-05-23T01:05:29Z https://community.graphisoft.com/t5/Documentation/Elevation-drawing-board-objects-disappear-out-of-frame/m-p/239446#M36439 Is there a Vertical Range defined for your Elevation?<BR /> If it is then it can cause elements to disappear (not displayed) in the Elevation if they are higher than the upper limit of the Vertical Range. Sat, 13 Jul 2019 17:18:41 GMT https://community.graphisoft.com/t5/Documentation/Elevation-drawing-board-objects-disappear-out-of-frame/m-p/239446#M36439 Laszlo Nagy 2019-07-13T17:18:41Z