topic Re: STOREY ELEVATION in Documentation

STOREY ELEVATION

Llian — Tue, 23 May 2023 01:07:11 GMT

The lowest level is at 25.00 m above sea level. I can't seem to enter 25.00 into the storey...and I have set the project reference level at 25.00 m sea level.
I tried typing 25.00 at P3 Elevation but it keeps reverting to 5.50.

Re: STOREY ELEVATION

Llian — Fri, 10 Feb 2017 02:34:17 GMT

the project section elevations....

Re: STOREY ELEVATION

Llian — Fri, 10 Feb 2017 02:36:44 GMT

project location set at 25.00 sea level...

Re: STOREY ELEVATION

Anonymous — Tue, 14 Feb 2017 05:26:56 GMT

Llian wrote:
The lowest level is at 25.00 m above sea level. I can't seem to enter 25.00 into the storey...and I have set the project reference level at 25.00 m sea level.
I tried typing 25.00 at P3 Elevation but it keeps reverting to 5.50.

rule number 1, you can't make the elevation of a lower storey higher than the elevation of a higher storey.

try typing 25.00 into height to next, then change the elevation 25.00....

As i rule when i do tall building, it was ground at storey 0, basements on negative storeys B1 is -1, B2 is -2, etc.

Re: STOREY ELEVATION

Stress Co_ — Tue, 21 Feb 2017 06:08:46 GMT

Elevation in Story Settings isn't the Elevation above sea level
(well,... I guess it can be).

Best practice in my opinion (and as allanp noted) is to set a datum story to Zero in the story settings.
You may find, it makes your reference levels easier to navigate.

A word of CAUTION if you're far along in this project.
Changing the Sea Level-Story settings can wreck havoc on
the model/saved views.
Make a back-up before you make changes.