topic Re: How to show dotted slab line from the floor above in current floor plan in Documentation

How to show dotted slab line from the floor above in current floor plan

Anonymous — Thu, 06 Feb 2025 10:35:29 GMT

Hi
I want to show the slab line from the upper floor on my current floor slab.
There is a punch in my 1st-floor slab . (See Fig 1 & 2)
I want to show the outline of the 1st-floor slab in my Ground Floor this way ( See Fig-3)

Re: How to show dotted slab line from the floor above in current floor plan

Barry Kelly — Thu, 30 Jul 2020 06:42:13 GMT

Set your upper slab to 'Show on Home and 1 Storey Down'
It should now show on the storey below.
If it is not showing as dashed, then go into the Project Preferences > Legacy and set the line type for 'Below Home Storey' to what you want.

Barry.

Re: How to show dotted slab line from the floor above in current floor plan

Anonymous — Thu, 30 Jul 2020 13:13:08 GMT

Barry wrote:
Set your upper slab to 'Show on Home and 1 Storey Down'
It should now show on the storey below.
If it is not showing as dashed, then go into the Project Preferences > Legacy and set the line type for 'Below Home Storey' to what you want.

Barry.

Great...... I got it.
Thanks a lot.