https://community.graphisoft.com/t5/Documentation/dimensioning/m-p/268760#M41856 Lilian:<BR /> <BR /> If you are having trouble with the Any Direction geometry method, just rotate the dimension line after placement.<BR /> <BR /> David Mon, 10 Dec 2018 14:00:15 GMT David Maudlin 2018-12-10T14:00:15Z https://community.graphisoft.com/t5/Documentation/dimensioning/m-p/268759#M41855 <DIV class="actalk-migrated-content"><T>This is driving me crazy…I have selected the geometry method but still having trouble getting the cursor to dimension at an angled...</T></DIV> Mon, 22 May 2023 21:53:46 GMT https://community.graphisoft.com/t5/Documentation/dimensioning/m-p/268759#M41855 Llian 2023-05-22T21:53:46Z https://community.graphisoft.com/t5/Documentation/dimensioning/m-p/268760#M41856 Lilian:<BR /> <BR /> If you are having trouble with the Any Direction geometry method, just rotate the dimension line after placement.<BR /> <BR /> David Mon, 10 Dec 2018 14:00:15 GMT https://community.graphisoft.com/t5/Documentation/dimensioning/m-p/268760#M41856 David Maudlin 2018-12-10T14:00:15Z https://community.graphisoft.com/t5/Documentation/dimensioning/m-p/268761#M41857 If you choose the angled geometry method, you can choose the angle from the first two points you click when placing the dimension.<BR /> This may not help in your situation if you want the dimension angled but still square to the elements.<BR /> You can use intersecting guide lines to get the points you want but the dimension will not be associated.<BR /> <BR /> Or you can temporarily rotate the plan so it appears square (orientation angle at the bottom of the plan window), then dimension, and then set back to 0°.<BR /> <BR /> <BR /> Or just adjust the dimension you have placed.<BR /> <BR /> <BR /> Barry. Tue, 11 Dec 2018 00:52:49 GMT https://community.graphisoft.com/t5/Documentation/dimensioning/m-p/268761#M41857 Barry Kelly 2018-12-11T00:52:49Z