https://community.graphisoft.com/t5/Documentation/Cladding-isn-t-joining-seamlessly-at-corners-in-elevation-and-3d/m-p/275516#M43155 <DIV class="actalk-migrated-content"><T>Hi,<BR /> I'm having a problem getting the cladding on my walls to wrap corners seamlessly in elevations and 3d. I have checked that corners are joining properly and I have checked the priorities. The odd thing is that some corners are showing correctly and others aren't - despite having the same settings as far as I can tell. In the image attached the corner is great on the lower level but is wrong on the upper level. Hope someone can help.</T></DIV> Tue, 23 May 2023 01:05:34 GMT Tracey Sharples 2023-05-23T01:05:34Z https://community.graphisoft.com/t5/Documentation/Cladding-isn-t-joining-seamlessly-at-corners-in-elevation-and-3d/m-p/275516#M43155 <DIV class="actalk-migrated-content"><T>Hi,<BR /> I'm having a problem getting the cladding on my walls to wrap corners seamlessly in elevations and 3d. I have checked that corners are joining properly and I have checked the priorities. The odd thing is that some corners are showing correctly and others aren't - despite having the same settings as far as I can tell. In the image attached the corner is great on the lower level but is wrong on the upper level. Hope someone can help.</T></DIV> Tue, 23 May 2023 01:05:34 GMT https://community.graphisoft.com/t5/Documentation/Cladding-isn-t-joining-seamlessly-at-corners-in-elevation-and-3d/m-p/275516#M43155 Tracey Sharples 2023-05-23T01:05:34Z https://community.graphisoft.com/t5/Documentation/Cladding-isn-t-joining-seamlessly-at-corners-in-elevation-and-3d/m-p/275517#M43156 Did you check if the "End Surface: Override using adjoining walls" option? see attached. Fri, 11 Jan 2019 06:35:40 GMT https://community.graphisoft.com/t5/Documentation/Cladding-isn-t-joining-seamlessly-at-corners-in-elevation-and-3d/m-p/275517#M43156 Srinivas 2019-01-11T06:35:40Z https://community.graphisoft.com/t5/Documentation/Cladding-isn-t-joining-seamlessly-at-corners-in-elevation-and-3d/m-p/275518#M43157 Thank you so much! The 'end surfaces' boxes were all ticked but 'align texture to edge' was also ticked on some. Such an easy solution but one that had eluded me for a long time.......... thanks again. Fri, 11 Jan 2019 19:10:40 GMT https://community.graphisoft.com/t5/Documentation/Cladding-isn-t-joining-seamlessly-at-corners-in-elevation-and-3d/m-p/275518#M43157 Tracey Sharples 2019-01-11T19:10:40Z