https://community.graphisoft.com/t5/Documentation/change-project-zero-to-a-new-elevation/m-p/278134#M43593 <DIV class="actalk-migrated-content"><T>I have a project that I had pretty much finished. I now just got a survey that the clients found. I made a mesh and added all the z elevations points. I was going to make contours lines off of this as the survey just has random survey elevation points. My problem is the mesh I made with the survey points is 900'+ above my model. I can't drag the model up to the mesh because all my window and doors are set to go off of story setting first floor. They don't move when I move the rest of the model up the 900' as they are linked to a story and not wall bases. I can move the mesh down but then all the survey points are off by the 900'+ which will just be confusing later on if cross referencing the survey.<BR /> <BR /> Is there a way to fix this? I thought I could just go into story settings and change the 0.0 to the 900+' , but you can't change the zero mark. I can't find anything on google or searching that tells you how to change project zero to a new elevation. I thought maybe go into project location and change something. I put in the correct lat and long for the project with no effect. I read changing the sea level in project location will not have any affect on project zero location so I didn't try that.</T></DIV> Tue, 23 May 2023 01:04:54 GMT gotphish001 2023-05-23T01:04:54Z https://community.graphisoft.com/t5/Documentation/change-project-zero-to-a-new-elevation/m-p/278134#M43593 <DIV class="actalk-migrated-content"><T>I have a project that I had pretty much finished. I now just got a survey that the clients found. I made a mesh and added all the z elevations points. I was going to make contours lines off of this as the survey just has random survey elevation points. My problem is the mesh I made with the survey points is 900'+ above my model. I can't drag the model up to the mesh because all my window and doors are set to go off of story setting first floor. They don't move when I move the rest of the model up the 900' as they are linked to a story and not wall bases. I can move the mesh down but then all the survey points are off by the 900'+ which will just be confusing later on if cross referencing the survey.<BR /> <BR /> Is there a way to fix this? I thought I could just go into story settings and change the 0.0 to the 900+' , but you can't change the zero mark. I can't find anything on google or searching that tells you how to change project zero to a new elevation. I thought maybe go into project location and change something. I put in the correct lat and long for the project with no effect. I read changing the sea level in project location will not have any affect on project zero location so I didn't try that.</T></DIV> Tue, 23 May 2023 01:04:54 GMT https://community.graphisoft.com/t5/Documentation/change-project-zero-to-a-new-elevation/m-p/278134#M43593 gotphish001 2023-05-23T01:04:54Z https://community.graphisoft.com/t5/Documentation/change-project-zero-to-a-new-elevation/m-p/278135#M43594 Correct procedure is to move the mesh down to 0 and then use Project Location to indicate that 0 is 900' Mon, 09 Dec 2019 15:56:28 GMT https://community.graphisoft.com/t5/Documentation/change-project-zero-to-a-new-elevation/m-p/278135#M43594 Eduardo Rolon 2019-12-09T15:56:28Z