topic Re: WINDOW AND DOOR MARKERS IN ELEVATIONS. in Documentation

WINDOW AND DOOR MARKERS IN ELEVATIONS.

Quirk — Tue, 30 May 2023 07:58:13 GMT

IN ARCHICAD 22 HOW DOES ONE PLACE WINDOW AND DOOR MARKERS ON WINDOWS AND DOORS IN SECTION AND ELEVATION DRAWINGS?

Re: WINDOW AND DOOR MARKERS IN ELEVATIONS.

David Maudlin — Sat, 12 Jan 2019 13:02:42 GMT

Quirk:

Set up a Label for your preferred settings, select the Windows and Doors, then use the Label Selected Elements command.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum. No need to shout, we can hear you fine.

David

WINDOW AND DOOR MARKERS IN ELEVATIONS.

Quirk — Mon, 28 Jan 2019 17:36:37 GMT

How can one get the window and door markers to show in section and elevation views?

Re: WINDOW AND DOOR MARKERS IN ELEVATIONS.

Eduardo Rolon — Mon, 28 Jan 2019 19:37:27 GMT

Read here,

Basically you will apply a Label to the Window/Door in the Elevation/Section

https://archicad-talk.graphisoft.com/viewtopic.php?f=11&t=49612

Re: WINDOW AND DOOR MARKERS IN ELEVATIONS.

Quirk — Wed, 08 May 2019 20:39:39 GMT

I was hoping for something automatic, where the elevation is linked to the plan view. So a change in the plan view would show on the elevations, and a change in the elevations would show in the plan view. I may be mistaken but I recall doing this with an earlier ArchiCAD version.

Re: WINDOW AND DOOR MARKERS IN ELEVATIONS.

Eduardo Rolon — Wed, 08 May 2019 20:56:45 GMT

open elev or section
Select all windows
Use “Label Selected Elements”
Done
—
Is almost automatic.

Re: WINDOW AND DOOR MARKERS IN ELEVATIONS.

Quirk — Wed, 08 May 2019 21:45:15 GMT

Very good, I knew there had to be a simple method.
Thanks

Re: WINDOW AND DOOR MARKERS IN ELEVATIONS.

Quirk — Wed, 08 May 2019 21:47:59 GMT

Sorry I left cap locks on.
thanks for the note about the signature.

Re: WINDOW AND DOOR MARKERS IN ELEVATIONS.

Karl Ottenstein — Wed, 08 May 2019 23:06:39 GMT

Quirk: You had two identical questions in two separate forums. I've merged all posts into this topic, as this is a Construction Documentation issue. Please do not ask the same question more than once...pick the most appropriate forum. Thanks.