topic Dimension walls in plan to core or with finishes turned off in Documentation https://community.graphisoft.com/t5/Documentation/Dimension-walls-in-plan-to-core-or-with-finishes-turned-off/m-p/284985#M44940 <DIV class="actalk-migrated-content"><T>I've just discovered something that others might want to check. I am dimensioning to the core because this is required for my documentation.<BR /> I have a composite wall comprising 90 mm stud with 10 mm plasterboard both sides. I noticed 10 mm errors in some of the dimensions. Turns out that Archicad may measure to the wall's reference line if this is on the outside or inside of the wall surface. Adjusting this by 10 mm to bring it to the face of the stud fixes this. I thought that the dimensions would measure to the core if that is what I selected, regardless of the position of the reference line.</T></DIV> Mon, 22 May 2023 21:54:35 GMT KeesW 2023-05-22T21:54:35Z Dimension walls in plan to core or with finishes turned off https://community.graphisoft.com/t5/Documentation/Dimension-walls-in-plan-to-core-or-with-finishes-turned-off/m-p/284985#M44940 <DIV class="actalk-migrated-content"><T>I've just discovered something that others might want to check. I am dimensioning to the core because this is required for my documentation.<BR /> I have a composite wall comprising 90 mm stud with 10 mm plasterboard both sides. I noticed 10 mm errors in some of the dimensions. Turns out that Archicad may measure to the wall's reference line if this is on the outside or inside of the wall surface. Adjusting this by 10 mm to bring it to the face of the stud fixes this. I thought that the dimensions would measure to the core if that is what I selected, regardless of the position of the reference line.</T></DIV> Mon, 22 May 2023 21:54:35 GMT https://community.graphisoft.com/t5/Documentation/Dimension-walls-in-plan-to-core-or-with-finishes-turned-off/m-p/284985#M44940 KeesW 2023-05-22T21:54:35Z Re: Dimension walls in plan to core or with finishes turned off https://community.graphisoft.com/t5/Documentation/Dimension-walls-in-plan-to-core-or-with-finishes-turned-off/m-p/284986#M44941 Could you show 1 or 2 screenshots that show the problem? Sun, 22 Apr 2018 11:10:15 GMT https://community.graphisoft.com/t5/Documentation/Dimension-walls-in-plan-to-core-or-with-finishes-turned-off/m-p/284986#M44941 Laszlo Nagy 2018-04-22T11:10:15Z