https://community.graphisoft.com/t5/Documentation/Slanting-wall-profile/m-p/285697#M45030 I had thought of using a slanting wall instead of a roof. Or use the answer to every Archicad modeling problem: converting the enclosure into a morph, to be shaped into whatever we want. If so, I'll have to refresh my morph skills! Sun, 22 Apr 2018 23:13:54 GMT KeesW 2018-04-22T23:13:54Z https://community.graphisoft.com/t5/Documentation/Slanting-wall-profile/m-p/285695#M45028 <DIV class="actalk-migrated-content"><T>I am preparing a 3D drawing for a house with a slanting wall profile to side elevations. Side walls extend 1000 mm past glazed front elevation and the front edges of the extension slope @ at 76.7 degrees, instead of the usual vertical edges. What is the easiest way to model these?</T></DIV> Tue, 23 May 2023 01:05:59 GMT https://community.graphisoft.com/t5/Documentation/Slanting-wall-profile/m-p/285695#M45028 KeesW 2023-05-23T01:05:59Z https://community.graphisoft.com/t5/Documentation/Slanting-wall-profile/m-p/285696#M45029 Put a single-plane roof onto it, crop your wall to the single-plane roof, delete the roof Sun, 22 Apr 2018 15:47:31 GMT https://community.graphisoft.com/t5/Documentation/Slanting-wall-profile/m-p/285696#M45029 felcunha 2018-04-22T15:47:31Z https://community.graphisoft.com/t5/Documentation/Slanting-wall-profile/m-p/285697#M45030 I had thought of using a slanting wall instead of a roof. Or use the answer to every Archicad modeling problem: converting the enclosure into a morph, to be shaped into whatever we want. If so, I'll have to refresh my morph skills! Sun, 22 Apr 2018 23:13:54 GMT https://community.graphisoft.com/t5/Documentation/Slanting-wall-profile/m-p/285697#M45030 KeesW 2018-04-22T23:13:54Z