https://community.graphisoft.com/t5/Documentation/AC22-Wall-Ends-Showing-in-Elevation/m-p/285946#M45043 <DIV class="actalk-migrated-content"><T>When I cap a wall with the wall end tool, the end lines are visible in my interior elevations (attached). They show perfectly fine in plan (also attached), at least as far as possible given building material pens, etc. The pen that shows up on the elevation is the interior pen of the wall composite. <BR /> <BR /> Nothing I've tried has solved the problem and I don't remember this happening in earlier versions. Any thoughts?</T></DIV> Wed, 17 May 2023 07:17:39 GMT Anonymous 2023-05-17T07:17:39Z https://community.graphisoft.com/t5/Documentation/AC22-Wall-Ends-Showing-in-Elevation/m-p/285946#M45043 <DIV class="actalk-migrated-content"><T>When I cap a wall with the wall end tool, the end lines are visible in my interior elevations (attached). They show perfectly fine in plan (also attached), at least as far as possible given building material pens, etc. The pen that shows up on the elevation is the interior pen of the wall composite. <BR /> <BR /> Nothing I've tried has solved the problem and I don't remember this happening in earlier versions. Any thoughts?</T></DIV> Wed, 17 May 2023 07:17:39 GMT https://community.graphisoft.com/t5/Documentation/AC22-Wall-Ends-Showing-in-Elevation/m-p/285946#M45043 Anonymous 2023-05-17T07:17:39Z https://community.graphisoft.com/t5/Documentation/AC22-Wall-Ends-Showing-in-Elevation/m-p/285947#M45044 Try "Fit to Wall Height". Mon, 18 Feb 2019 20:42:10 GMT https://community.graphisoft.com/t5/Documentation/AC22-Wall-Ends-Showing-in-Elevation/m-p/285947#M45044 Stress Co_ 2019-02-18T20:42:10Z