topic Re: ZONE CONTOUR LINE GRAPHIC OVERRIDE COMBINATIONS in Documentation

ZONE CONTOUR LINE GRAPHIC OVERRIDE COMBINATIONS

Sidarkkus — Fri, 19 May 2023 13:21:01 GMT

Hi Folks!

I was trying to deactivate the contour line of Zones in Graphic Override Combinations (see attached), but the contour line still appear. Obviously I can deactivate the contour line in Zone Selection Settings but the idea is set a combination to use different views (with and without contourne line).

Thanks for your help.

Re: ZONE CONTOUR LINE GRAPHIC OVERRIDE COMBINATIONS

Barry Kelly — Mon, 26 Oct 2020 01:12:07 GMT

Graphic Overrides can not turn the line off.
They can only override the line type to something different (a wide spaced dot maybe) or change the colour to white so it will not print.

Barry.

Re: ZONE CONTOUR LINE GRAPHIC OVERRIDE COMBINATIONS

Sidarkkus — Fri, 13 Nov 2020 16:19:12 GMT

Barry wrote:
Graphic Overrides can not turn the line off.
They can only override the line type to something different (a wide spaced dot maybe) or change the colour to white so it will not print.

Barry.

Change the color of line through the Graphic Overrides is a good idea, Thank you Barry.

Re: ZONE CONTOUR LINE GRAPHIC OVERRIDE COMBINATIONS

runxel — Fri, 13 Nov 2020 18:50:53 GMT

Another common trick is an "invisible" linetype, which has a dot and the distance to the next one is set to the highest value possible. It will still give you a very fine dot in each corner however. Combined with the white pen it should be very convincing (: