topic Floor Plan Cut Plane in Documentation

Floor Plan Cut Plane

Conrado Dominguez — Fri, 26 May 2023 14:34:39 GMT

The selected setting for the Floor Plan displays the plan correctly, however, it does not update in the View or the Layout.

Not only does that but when I display again the Floor Plan, the <Documents> <Set floor plan cut view> resets back to the program default setting.

Any ideas how to retain the setting for the specific floor level ?

As always, grateful for your help

Re: Floor Plan Cut Plane

David Maudlin — Sun, 28 Feb 2016 13:17:50 GMT

Conrado:

The Floor Plan Cut Plane (FPCP) settings are saved as part of the View. Select the View in the Navigator, click the Settings... button, then in View Settings > 2D/3D Documents > click the Floor Plan Cut Plane Settings... button and set the FPCP Settings as desired, then click OK. These settings should be applied when double-clicking that View in the Navigator, and be part of the Drawing of that View on the Layout. This allows different FPCP Settings for different Views.

David

Re: Floor Plan Cut Plane

Conrado Dominguez — Sun, 28 Feb 2016 17:47:48 GMT

Thanks David.

Reliable help from Washington when is needed

Re: Floor Plan Cut Plane

David Maudlin — Mon, 29 Feb 2016 13:00:24 GMT

Conrado wrote:
Reliable help from Washington when is needed

HA!

David