https://community.graphisoft.com/t5/Documentation/no-witness-line-with-elevation-dimensions/m-p/141711#M58850 David, of course it was right before my eyes. Thank you. Thu, 19 Apr 2012 16:15:43 GMT Dave Brach 2012-04-19T16:15:43Z https://community.graphisoft.com/t5/Documentation/no-witness-line-with-elevation-dimensions/m-p/141709#M58848 <DIV class="actalk-migrated-content"><T>When I use the elevation dimension in a section or elevation there is no witness line function: the first click on the screen places the actual dimension every time. If I then select it, I still cannot edit any witness line. This means I also cannot place several elevation points in one command. Is there a setting somewhere that I am missing?</T></DIV> Tue, 30 May 2023 13:13:16 GMT https://community.graphisoft.com/t5/Documentation/no-witness-line-with-elevation-dimensions/m-p/141709#M58848 Dave Brach 2023-05-30T13:13:16Z https://community.graphisoft.com/t5/Documentation/no-witness-line-with-elevation-dimensions/m-p/141710#M58849 Dave:<BR /> <BR /> With the Dimensioning Tool selected, look in the Info Box for the <FONT color="blue">Geometry Methods</FONT>, there are 4 of them, and the first 2 place a single marker, the second 2 place a string of markers.<BR /> <BR /> David Thu, 19 Apr 2012 12:17:24 GMT https://community.graphisoft.com/t5/Documentation/no-witness-line-with-elevation-dimensions/m-p/141710#M58849 David Maudlin 2012-04-19T12:17:24Z https://community.graphisoft.com/t5/Documentation/no-witness-line-with-elevation-dimensions/m-p/141711#M58850 David, of course it was right before my eyes. Thank you. Thu, 19 Apr 2012 16:15:43 GMT https://community.graphisoft.com/t5/Documentation/no-witness-line-with-elevation-dimensions/m-p/141711#M58850 Dave Brach 2012-04-19T16:15:43Z