topic Re: Mesh slope labels in Documentation

Mesh slope labels

Chris Pooley — Wed, 03 Jul 2024 23:57:09 GMT

Hi,

I am trying to find out how to add an auto label to a mesh. There is already a topic similar to this titled Roof plan slope labels, here -

https://community.graphisoft.com/t5/Documentation/Roof-plan-slope-labels/td-p/291406

But this topic is closed so I can not ask on that, so I am creating a new topic, I hope this is ok.

The solution for that topic was to add autotext.

I am creating a driveway with a mesh, I am wondering if there is a way to show a grade with an automatic tool at a specific point, that will update automatically update when I change the levels at the node? i.e. the driveway wont have a single slope in a direction, it will fall in a number of directions at different angles in different places.

Re: Mesh slope labels

Barry Kelly — Thu, 04 Jul 2024 01:02:21 GMT

@Chris Pooley wrote:

But this topic is closed so I can not ask on that, so I am creating a new topic, I hope this is ok.

Perfect. 👍

I am not aware of an automated solution with a mesh.

Roofs have a particular pitch where as mesh surfaces don't.

If you are handy with GDL you could make an object that allows you to set the height and position of 2 nodes and will give you the resulting grade.

But there is no way I know of to associate it to the mesh surface so it would be automatic.

I am not sure if anyone has already done this.

If someone has and they would like to share, please do.

I am not sure if it would be possible with an add-on that could detect the surface height of 2 points and give you the resulting slope.

But then you need to be able to create add-ons, or know someone that can do it for you.

I have never delved into the add-ons.

Barry.

Re: Mesh slope labels

Yves — Sat, 06 Jul 2024 02:42:34 GMT

Good morning,
I have just tested an idea from a guardrail panel, I managed to obtain the correct value in 3D but unfortunately, the 2d projection gives me a value of zero.

!!!!SCRIPT 3D EPS = 0,0001 ang_pan = 0 SI RAILINGPANEL_GEOMETRY[2][3]-RAILINGPANEL_GEOMETRY[1][3]> EPS OU RAILINGPANEL_GEOMETRY[2][3]-RAILINGPANEL_GEOMETRY[1][3]< -EPS ALORS ang_pan = 90-ATN((GÉOMÉTRIE_PANNEAU_RAILING[2][1]-GÉOMÉTRIE_PANNEAU_RAILING[1][1])/ABS((GÉOMÉTRIE_PANNEAU_RAILING[2][3]-GÉOMÉTRIE_PANNEAU_RAILING[1][3]))) FIN SI SI RAILINGPANEL_GEOMETRY[2][3]-RAILINGPANEL_GEOMETRY[1][3]> EPS ALORS ang_pan = -ang_pan long_panneau = GÉOMÉTRIE_PANNEAU_RAILING[1][1]-GÉOMÉTRIE_PANNEAU_RAILING[2][1] DÉFINIR LE STYLE « bb » Arial,(ht_text_3D/1000*GLOB_SCALE)*1000,5,0 STYLE DE L'ENSEMBLE "bb" ADDX ABS(panneau_long/2) ROTY ang_pan TEXTE 0,01,0, STR ("%#.2dd",ABS(ang_pan))