topic Re: amyuni PDF printer and architectural D in Documentation

amyuni PDF printer and architectural D

Anonymous — Fri, 19 May 2023 20:27:25 GMT

Print to PDF is a wonderful option. Much easier than plotting to a file and having to know what plotter you are using if sending to another for printing. I have two question though.

1. Are there any problems or discrepancies with printing from a PDF (such as correct scaling) vs. plt files?

2. Why is it that with the wealth of paper layouts available with the pdf printer there is no architectural "D" or custom in "inch"? I've created a custom layout using mm's (610 and 915). While this creates a file size of 24.01"x36.01" which is pretty darn close, it is not exact.

Re: amyuni PDF printer and architectural D

rm — Fri, 30 Apr 2004 21:58:08 GMT

Simond36,

What OS are you on. In OSX, print to PDF is in the OS and allows you to use standard US sheet sizes as long as you have a plotter driver ( Like HP ) that has US sheets availble.

Please elaborate for additional input. If you are on Windows, I'll defer to people with experience on that side of the fence.

Good Luck.
Archtitects Design Forum, Ltd.

Robert Mariani

Re: amyuni PDF printer and architectural D

Anonymous — Sat, 01 May 2004 00:13:33 GMT

Thanks for your response.

I am using XP pro with the amyuni pdf program that came with archicad.

By the way "D" (US) size paper is an option, but this paper is 22x34, thus not "architectural D" 24"x36"

Re: amyuni PDF printer and architectural D

Daniel Lindahl — Sat, 01 May 2004 10:19:03 GMT

simond36 wrote:
Thanks for your response.

I am using XP pro with the amyuni pdf program that came with archicad.

By the way "D" (US) size paper is an option, but this paper is 22x34, thus not "architectural D" 24"x36"

Or you could be a forward looking early adopter and go with A1 - the rest of the world uses that! That is roughly 23-3/8 Henry VIII thumbs X 33-1/8 Henry VIII thumbs.

And that's not all folks, each sheet size in the A sequence is the previous one folded in half, and they are ALL the same proportions! (1:square root of 2). This makes it so easy to do reduction sets of drawings without losing stuff at the edges.

And incidentally, A0, the first one in the series, is exactly 1 m2 in area.

Re: amyuni PDF printer and architectural D

Erika Epstein — Sun, 02 May 2004 04:09:03 GMT

Below the D 22" x34" there is Arch D (24" x36")

Re: amyuni PDF printer and architectural D

Laszlo Nagy — Sun, 02 May 2004 21:36:35 GMT

On my computer, Amyuni lists about 150 different paper sizes. Maybe what you need is hidden somewhere there. I know I can find all sizes we use in our office in Hungary (A4-A0).
Laszlo

Re: amyuni PDF printer and architectural D

Anonymous — Tue, 04 May 2004 16:52:18 GMT

Thanks Erika, but I have checked a thousand times and after your post checked again and I have no ARCH D option. I didn't have it with 7.0 8.0 or 8.1. The version of Amyuni I have is 2.09 PRO Graphisoft (installed from 8.1 CD).

Re: amyuni PDF printer and architectural D

vfrontiers — Tue, 04 May 2004 21:43:16 GMT

For some unknown reason, I cannot find any US arch sheets either... I have a little excel calculator to tell me what the equivalent size in mm is so I can use the CUSTOM box... The old 2.07 AMYUNI had the arch sizes....

Re: amyuni PDF printer and architectural D

Anonymous — Tue, 04 May 2004 23:07:21 GMT

Ok, I've figured out how to add paper sizes to your options in amyuni pdf.
The pdf driver pulls the paper sizes from other drivers installed on your computer. So if you only have the regular printers drivers installed on your computer than you probably only have MIcrosoft Windows Standard sizes for paper size options.

To solve this, simply

add a new printer
install printer manually
select a driver that supports large formats ( I chose HP GL 2 plotter)
install
and you should now have all kinds of paper sizes you didn't have before.

I hope this helps someone besides myself.

Re: amyuni PDF printer and architectural D

vfrontiers — Wed, 05 May 2004 00:35:22 GMT

Hmmm.. I have an HP DesignJET 500ps driver on board here... But now that you mention it, I cannot get it to STICK with the ARCH size either. I always have to go in and EDIT PAPER SIZES to get them to show, then by next print I have to do it again.....

More study...

Re: amyuni PDF printer and architectural D

Pete — Tue, 08 Jun 2004 16:25:15 GMT

I just installed a driver for HP750c+ and then deleted and re-installed my Amyuni driver. Amyuni still offers the same list of page sizes with no Architectural sizes. Very frustrating.

Anyone else have any luck?

Re: amyuni PDF printer and architectural D

Pete — Tue, 08 Jun 2004 16:39:08 GMT

Thanks Simond36, I should have taken your instruction more literally.

I installed the XP supplied version of the HPGL2 plotter driver from the list and this time the Amyuni driver complied and provided the new sizes.

Apparently, it depends on which driver you use.

Re: amyuni PDF printer and architectural D

Link — Tue, 08 Jun 2004 17:57:20 GMT

2. I've created a custom layout using mm's (610 and 915). While this creates a file size of 24.01"x36.01" which is pretty darn close, it is not exact.

It's because a 24x36 sheet is actually 609.6 x 914.4mm and Amyuni doesn't accept decimal points. See my post at http://archicad-talk.graphisoft.com/viewtopic.php?t=2961

Cheers,
Link.