topic Re: Amyuni PDF driver: Problem when printing fills - help.. in Documentation

Amyuni PDF driver: Problem when printing fills - help....

Anonymous — Fri, 19 May 2023 14:06:41 GMT

Since switching to PM 9, I have had nothing but problems printing to pdf files. Specific problems:

- When using the Amyuni PDF converter that came with PM 9, the pdf files are enormous (8K for a single 11 x 17 page @ 300 DPI), and archicad fills are printing in a very strange manner. I have tried adjusting the display & output settings in PM without any results.

- When I use my Acrobat PDF writing (the one I have used for quite some time), the files print (at what appears to be normal file sizes), but the fills are still printing incorrectly, and all my plotmaker text is garbled.

Note that these problems occur both when trying to print directly from plotmaker and when using publisher.

An easy solution for me would be to simply go back to using PM 3.1 (I never had any trouble generating pdf files with earlier versions of PM), but since 9 is not backwards compatible with PM 3.1, I would have to re-create all the work I just put into a couple of new PM 9 projects.

Any help would be greatly appreciated.

Don

Re: PDF problems with Plotmaker 9 - help....

Eduardo Rolon — Mon, 18 Oct 2004 13:05:25 GMT

I have not tried this on the PC version of AC09 but in PM under publish you have the option of saving to PDF. In the Mac version it works fine.

more details

Anonymous — Mon, 18 Oct 2004 14:46:54 GMT

Correction to my earlier post (it was 1:30AM local time...) - the page size the Amyuni pdf writer was generating is 8MB per page, this is creating enormous pdf files. I have this pdf problem both when creating them from PM or Archicad.

Also, the specific fill that is not printing correctly is the fill I use for my shadows in elevation - a 50% fill with one pen set to a light gray pen weight, the other to the "null", or 0 pen. Using the empty pen prevents lines in my elevations from being completely stamped out by my shadows.

Interestingly enough, I have just changed my shadow fills from 50% to a solid fill, and the pdf problem went away - has anyone seen this happen in PM and/orArchicad?

Thanks,

Don

Re: PDF problems with Plotmaker 9 - help....

Pete — Tue, 19 Oct 2004 13:44:00 GMT

I just had the same problem. I have always used solid fills with a light gray pen for shadows, but this time I used a "cut stone" fill for my exterior walls and the PDF file was a whopper!

I suspect the display was set to vectorial and the file was getting a bazillion little lines to draw. This would also be the case if you use the "screen" fills for shadows.

Fill problems with the Amyuni driver...

Anonymous — Tue, 19 Oct 2004 14:17:04 GMT

Hi Pete,

I did some research since my post and have determined that the problem is with the new Amyuni pdf driver and only when you try to print solid fills (bit-map) at less than 100% (I saw the problem with 25%, 50%, and 75% fills).

I located a post on the Graphisoft support site regarding the Amyuni driver and transparent fills (I assume that transparent means less than 100%) . I followed the instructions given (changing a key in the registry), but it did not fix the problem... I have Archicad 9.0 on a second computer, where I did not install the Amyuni driver - and my old pdf driver is working with 9.0 just fine.

I tried removing the amyuni driver, but my old pdf driver still had problems; I tried re-installing the amyuni driver, but the problem still existed. So it appears that the Amyuni driver is the culprit, and that it has somehow messed up all of my pdf drivers on my main system. So, the problem seems to be:

1) When using the Amyuni driver (I have Windows XP)

2) When printing solid fills of less than 100% (Archicad and Plotmaker)

Re: Amyuni PDF driver: Problem when printing fills - help..

aahatimo — Tue, 09 Nov 2004 19:12:36 GMT

i cannot get amyuni pdf to create a pdf from any program since my v9 install. i get a printer error message: printer failed when starting the document. i have run the installer as karl suggests from the v9 folder, still a no go. the only other change was xp sp2 a few weeks back.
any other ideas?

Re: Amyuni PDF driver: Problem will not print - period

aahatimo — Thu, 11 Nov 2004 00:35:27 GMT

no ideas out there?

Re: Amyuni PDF driver: Problem when printing fills - help..

Pete — Thu, 11 Nov 2004 15:22:01 GMT

Sorry Tim,

Mine is working on XP SP2. Maybe delete it from the Printers dialog and try reinstall?

Re: Amyuni PDF driver: Problem when printing fills - help..

aahatimo — Thu, 11 Nov 2004 16:18:36 GMT

Pete wrote:
Sorry Tim,
Mine is working on XP SP2. Maybe delete it from the Printers dialog and try reinstall?

thanks pete! i have tried that a few times w/ no luck. there must be some setting buried in registry or prefs that is not totally uninstalling amyuni driver. there is no amyuni showing in the add / remove programs under control panel. no amyuni folder anywhere. is there a folder location? double clicking on the install.exe file in ac9 pdf converter file supposedly goes thru removing and reinstalling pdf printer and says it was successfull. the last line says "launch 'install-u' to uninstall". where would one launch this from?
would the adobe reader 6.0.2 conflict w/ amyuni driver?
i may have to install my old acrobat 4.0 so i can get back to printing pdfs.

Re: Amyuni PDF driver: Problem when printing fills - help..

Pete — Thu, 11 Nov 2004 16:44:49 GMT

Check Amyuni properties in XP's "Printers and Faxes" Dialog:

Model: Amyuni PDF Converter 2.09

Ports: LPT1 is checked

Advanced: Always Available; Amyuni PDF Converter 2.09; Print Directly to Printer

Amyuni Tech.: Version 2.09c Pro - Graphisoft

Re: Amyuni PDF driver: Problem when printing fills - help..

aahatimo — Thu, 11 Nov 2004 17:07:01 GMT

i just deleted amyuni from printer folder, rebooted, reinstalled via v9 > pdf converter folder> install, same out come, unable to print. all my settings match yours.
i just sent in a ask us to gs us tech support, maybe they will have some ideas.
thanks again,
tim

Re: Amyuni PDF driver: Problem when printing fills - help..

Steve Jepson — Thu, 02 Dec 2004 05:22:42 GMT

I am also having a lot of trouble printing .pdf's now that I am using version 9.

I have Acrobat 6.0 Pro. I can not create a .pdf from ArchiCAD any more by selecting the Acrobat and printing to file. I have been able to create a .pdf by using the Amyuni PDF Converter but the file is not a .pdf
I have to open the file with the Acrobat and save it as a .pdf. The problem is that these new files look great on the screen and print perfectly on my laser printer but none of the plotting services here in town can print them out as they look. They are all distorted. These files do have .jpg images in them also and several kinds of fills but they are not over 500KB. I also took the files to CopyMax and they had the same problem. I turned them into .tiff's and got a crude print but its not very good resolution and the file was huge of course.

Any one else having this trouble?

Need email/FTP address to send files...

Anonymous — Tue, 07 Dec 2004 05:36:15 GMT

Can the person from Graphisoft who emailed me regarding this problem contact me again? I accidentally deleted the email & have files ready to send for him to look at. An email address and FTP location would be great.

Thanks

Don
don_dirocco@hotmail.com

Need email/FTP address to send files...

Anonymous — Tue, 07 Dec 2004 05:37:48 GMT