topic stone wall with differrent material in inner space in Documentation

stone wall with differrent material in inner space

ioanutopiaso — Fri, 13 Feb 2026 21:58:23 GMT

hello!
as you can see in the printscreens i have a stone wall in the outer space and a second (stucco) in the inner space but there the material change to stucco. i use a GO in order to have the stone fill, but i dont know hot to make visible the stucco material.Also the stucco material i want it until the level of the slab. The wall with stucco is a composite (outer skin stone inner skin stucco)
thn!

Re: stone wall with differrent material in inner space

Sefa Yakut — Sat, 14 Feb 2026 00:00:35 GMT

Hi,

You should model your wall as two separate parts. One wall should be covered with stucco material, and the second wall should be covered with stone material.

Re: stone wall with differrent material in inner space

Lingwisyer — Mon, 16 Feb 2026 01:19:44 GMT

Graphic Overrides will override an element in their entirety.

If the edge of your slab is stucco, and it penetrates the inner finish, you could possibly SEO downward on the wall inheriting surfaces from the operator.

Ling.

ps. An opening with a Surface Override could also work.

Re: stone wall with differrent material in inner space

Laszlo Nagy — Sun, 15 Feb 2026 14:43:53 GMT

Another way of modeling it with two walls is:

Place a rectangular Opening into the Wall. The size of the Opening will be as large as the stucco plus the Slab.

Then, just place another Wall with Stucco to fill the whole Opening.