https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53874#M8627 If you have the correct printer driver (or .ppd file) for the printer/plotter in question you should be able to choose it and set the correct page size. <BR /> <BR /> If the driver isn't available, you could in page setup select a page size half as big as your goal and set page scaling to 50%, produce your pdfs and then instruct the printer to scale them up when printing.<BR /> <BR /> The publisher works just like ordinary printing. The important consideration is to set the master layout at a size that works to print at the available paper size, either at 100 % or scaled. Mon, 21 May 2007 19:14:19 GMT Thomas Holm 2007-05-21T19:14:19Z https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53870#M8623 <DIV class="actalk-migrated-content"><T>I am not educated in the publishing and master layouts components of ac 10. I need to print plans on 24 x 36. I have a master layout set up to arch D with my drawings on it. my problem is i cannot get the same paper size in the page setup, and i cannot create a PDF file to save to. Any information will help!</T></DIV> Fri, 19 May 2023 20:22:19 GMT https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53870#M8623 Anonymous 2023-05-19T20:22:19Z https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53871#M8624 Mac or PC? Mon, 21 May 2007 02:06:10 GMT https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53871#M8624 Stress Co_ 2007-05-21T02:06:10Z https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53872#M8625 im on a PC Mon, 21 May 2007 02:32:33 GMT https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53872#M8625 Anonymous 2007-05-21T02:32:33Z https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53873#M8626 Mac here.. sorry, I'm no help. Mon, 21 May 2007 14:49:43 GMT https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53873#M8626 Stress Co_ 2007-05-21T14:49:43Z https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53874#M8627 If you have the correct printer driver (or .ppd file) for the printer/plotter in question you should be able to choose it and set the correct page size. <BR /> <BR /> If the driver isn't available, you could in page setup select a page size half as big as your goal and set page scaling to 50%, produce your pdfs and then instruct the printer to scale them up when printing.<BR /> <BR /> The publisher works just like ordinary printing. The important consideration is to set the master layout at a size that works to print at the available paper size, either at 100 % or scaled. Mon, 21 May 2007 19:14:19 GMT https://community.graphisoft.com/t5/Documentation/problems-with-printing-plans/m-p/53874#M8627 Thomas Holm 2007-05-21T19:14:19Z