The IFC Type Attribute always has such a format: Walls - ifcWall, Doors - ifcDoor, Furnitures - ifcFurnishingElement, etc.
This is how the IFC file classifies elements. You cannot change the format of these classes, because it is just how it is in IFC, but there are 2 things you can do:
- You can go to your IFC Export Translator, and and change the Type mapping. This is where you can choose what IFC Type should an element get based on their ARCHICAD classification. (e.g. Walls are classified as ifcWall by default, but you can map them to anything)
- You can map the ARCHICAD classification to a new property, and use the property mapping in the Export Translator to map this to a custom IFC property.
If you check the default mapping though, you will see that walls are actually mapped to be ifcWall type, but in the picture it still says ifcWallStandardCase
. This is because if you export an element as a generic BREP geoemtry, it will be classified as ifcWall, but if you export them as extruded elements (so their geometry is properly defined by an extrusion), it will be a standard case wall, and thus classified as such. This is also something you cannot change, the only thing you could do to avoid this is exporting these walls as BREP instead of extruded geometries.
I hope this answers your question. Let me know if it was not clear or I missed something.
Daniel Alexander Kovacs
Professional Services Consultant
For Troubleshooting and useful Tips & Tricks visit