Find the next step in your career as a Graphisoft Certified BIM Manager!

Collaboration with other software
About model and data exchange with 3rd party solutions: Revit, Solibri, dRofus, Bluebeam, structural analysis solutions, and IFC, BCF and DXF/DWG-based exchange, etc.
SOLVED!

Wall Tags not converting to .dwg very well

What could be done to configure the Wall Tag Label so the ID is in the right place when the file is saved as .dwg ?

 

It's a pain to edit all of them in AutoCAD.   

https://www.youtube.com/watch?v=EBUGqdwjoNc

 

 

 

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

1 ACCEPTED SOLUTION

Accepted Solutions
Solution

The solution is this  -  2022-06-22_11-20-05.png

 

Either one of these text alignment settings work -  the two in the middle don't.   I had them all set to Center the text in the Lable but that does not work - at least when opening the generated .dwg with AutoCAD 22.   Problem is solved for me.  2022-06-22_11-31-08.png

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

View solution in original post

3 REPLIES 3
mija
Enthusiast

Hi, you need to make sure that your dwg translatior, doesn't have this option checked.

mija_0-1655879709552.png

 


Archicad 25, build 4013
Montenegro

Not making any differnce with the Wall Tag Label I am using  

 

2022-06-22_10-52-18.png

 

What does help some in speeding up the editing is to use the setting for Explode Archicad Elements.  But that is not a good a good solution either.  

 

2022-06-22_11-01-21.png

 

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

Solution

The solution is this  -  2022-06-22_11-20-05.png

 

Either one of these text alignment settings work -  the two in the middle don't.   I had them all set to Center the text in the Lable but that does not work - at least when opening the generated .dwg with AutoCAD 22.   Problem is solved for me.  2022-06-22_11-31-08.png

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25