Collaboration with other software
About model and data exchange with 3rd party solutions: Revit, Solibri, dRofus, Bluebeam, structural analysis solutions, and IFC, BCF and DXF/DWG-based exchange, etc.

Zones

Maki
Participant

Hello,

 

I am having a problem with the zone tool, after I use it with Inner Edge lets say to give me the m2 of the bedroom, after that when I make changes to try to circle around something with the same zone stamp the number of the measurement doesn't change. 

Any idea where is the problem?

 

I will shot it with 2 screenshots compered as the number doesn't change.

3 REPLIES 3
Miha_M
Advisor

Menu Bar > Design > Update Zones

Miha_M_0-1647441780558.png

 

| Archicad 4.55 - 27
| HP Z840 | 2× E5-2643 v4 | 64 GB RAM | Quadro M5000 | Windows 10 Pro x64
| HP Z4 G4 | W-2245 | 64 GB RAM | RTX A4000 | Windows 11

I know that feature but in previous projects where the problem i have now was normal and wasn’t like that.

thanks though!

If you use Polyline/Manual Zone boundary, then the area information updates "on the fly". If you use inner edge then you need to use the "Update Zones". Inner edge relies on a boundary that is not the zone itself...which means that if you start pulling the corners then it cannot measure as it has no connection to the boundary.

Erik Bjornhage : SwedishChef, ETTELVA Arkitekter, Gothenburg, Sweden
Architect : Digital Development : Graphisoft Cert. BIM-Manager
ETTELVA Arkitekter : Eriks LinkedIn
DELL Precision 5570; i7-12700H; 64 GB; RTX A2000 [8GB] : AC12 - future