cancel
Showing results for 
Search instead for 
Did you mean: 

Stair Tool Basics - Stair Turning and Segment types

Verginia Pozneac
Graphisoft Alumni
Graphisoft Alumni
Turning stairs can be constructed in 2 different methods: using turning type method or segment type method. Let's have a quick look at the main aspects of those two types.

Turning Type

Turning type can be used in 3 ways:
  • Landing
  • Winder with Equal Angles
  • Winder with Equal Goings

 

wp-content_uploads_2018_01_Landing-300x268.png
wp-content_uploads_2018_01_Winder-with-equal-angles-300x268.png
wp-content_uploads_2018_01_Winder-300x268.png

 

You can change the Turning Type from the Settings dialog / infobox as well, as long as your stair only has one type of turnings. If you have different turning types in a single stair (eg. a winder and a landing), you can change the settings of each turning separately, if you click on the corner node, and select Turning Type Options from the Pet Palette.

wp-content_uploads_2016_06_Info_18x18.png
NOTE: In the USA version of ARCHICAD, “Goings” are known as “Runs”.

You can find more details about Stair turning types here.

Segment Type

Segment type method is composed of segments which can be defined during the input or afterwards. There can be several options combining segment types:

wp-content_uploads_2018_01_Segment-types-1024x788.png

You can find more information about Stair segment types here.

Summary

The changes which you would like to make afterwards can be done by dragging different parts of the stair.
  • To change the Turning Type of the Stairs you have to click the corner.
  • To change the Segment Type of the Stairs you have to click the Reference Line of the Stairs.
wp-content_uploads_2018_01_Edit-Turning-Type-300x267.png
wp-content_uploads_2018_01_Edit-Segment-Type-300x295.png
For more information about how Stair Turning and Segment types work, read the following guides about how to use them to create Stairs with Equal Angle winders and Stairs with Equal Going/Run winders.

Still looking?

Browse more articles

Back to articles

See latest solutions

Accepted solutions

Start a new discussion!