Design articles
cancel
Showing results for 
Search instead for 
Did you mean: 

Articles

Curtain Wall Tool - Projection Modes

After the redesign of the Curtain Wall Tool in ARCHICAD 22, it can have different projection modes on a floor plan view (found under Floor Plan and Section in the element's Settings dialog). These can be set for Uncut, Cut and Overhead components, si...

Parametric Profiles - Adjustable fireproofing

As a newly introduced feature in ARCHICAD 22, the parametricity of profiles can be used for multiple purposes. One of them is to create adjustable fireproofing/insulation for beam or column elements. Later, the thickness can be adjusted by element, l...

Parametric Profiles - Wall with offsetable skins

A Wall element can be a simple wall and it can also use composites or profiles. Composite structures can be used with Shell, Roof and Slab elements as well, can have up to 48 skins with individual skin separator lines However, since with ARCHICAD 22 ...

How to Speed-up Curtain Wall in ARCHICAD 22

You may experience the following whilst working with Curtain Wall in ARCHICAD 22: Working with Large Curtain Walls may cause some slowdowns Curtain wall may be faster in ARCHICAD 21 than in ARCHICAD 22 Working with Large Curtain Walls may cause some ...

Migrating Curtain Walls to ARCHICAD 22

Since there is a new Curtain Wall Tool in ARCHICAD 22 there are a few things you need to be aware of if you want to migrate your project that contains Curtain Walls from ARCHICAD 21 to 22. Generic Frame and Panel During the migration of the project „...

Site Modeling with an Aerial Photo-Surface in ARCHICAD

Step 1: Set Project Location in Project Preferences This will be the place in the real world where your Project Origin is Set the height above Sea Level. You can reconfirm the location by clicking on "Show in Google Maps…" button. Step 2: Add an Aeri...

Accessories Add-On

How to use Accessories Add-on With the help of this ARCHICAD Add-On, you can supplement the roof, slab, and wall elements with special objects. Make sure you add the Accessories Library to your project, using Library Manager. First, select an existin...

wp-content_uploads_2018_02_01-300x193.png wp-content_uploads_2016_06_Info_18x18.png wp-content_uploads_2018_02_02-267x300.png wp-content_uploads_2017_04_Screen-Shot-2017-06-02-at-15.28.05.png
Top Contributors