Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

Alt grabbing and injecting into another not working

Anonymous
Not applicable
I would usually alt to bring up the eye dropper to grab the characteristics of one element say a window, then alt+ctrl to inject it into another which would change it to that type but it doesnt seem to be working for me now, any advice on what might be wrong?

Thanks
2 REPLIES 2
Barry Kelly
Moderator
Are you saying there is no dropper/syringe?

Or they are there but just don't work?
If that is the case it could be the current transfer settings.
When you bring up the syringe you should see a small text box that has the current transfer setting - you can click in that box to bring up other settings.


Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Lingwisyer
Guru
Edit => Element Settings => Element Transfer Settings...

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660