I recently changed some doors in my model from D1 81 (Wood Internal Door) to D1 Commercial Door 81 so I could show the exit device on an interior elevation. However this has thrown my door schedule off since the commercial door has no control for opening direction (Inside/Outside) like the wood door. So now my schedule picks up the wrong zone number (uses the corridor instead of the room since the door must swing in the path of travel.)
Am I missing something, or should I abandon this part? I have tried flipping the door after choosing the wrong orientation without sucess.
Thanks for any help,
Alex Thompson
AC 8.1v2 (2256), Mac OS X 10.3.5, PowerMac G4
