Design forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Door Trim is extending to below the bottom of the door

Steve Jepson
Advisor

??  I don't remember seeing this before.  Can't seem to find the problem.

2022-01-20_17-38-28.png

ArchiCAD 25 5005 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro

8 REPLIES 8

DGSketcher
Rockstar

The only way I think (apart from a bug) that that could be done is the placement of the door is pushing it below the base of the wall and there is an undercut applied in the door leaf settings?

Apple iMac macOS Monterey / AC25UKI (most recent builds)

4dProof
Expert

 to be a glitch. I can't find anything in any of the ootb doors that would allow this. Which door part is it? in the INT or USA library?

BIM solutions and trouble shooting (self proclaimed) expert

USA library.  I didn't have time to fuss with it.  Used a different door that works fine. 

ArchiCAD 25 5005 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro

Steve Jepson
Advisor

I thought I fixed it yesterday with a sill to base of wall setting. nope.  All the exterior doors have this morning.  Some sort of duplicate wall or something.  ?  

ArchiCAD 25 5005 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro

has to be a bug in the door parameters somewhere, since it doesn't seem possible to do this intentionally with a default door. possibly translation/migration issue or something. if you reset the door to default settings then rebuild the trim/frame/leaf, does it still happen?

 

BIM solutions and trouble shooting (self proclaimed) expert

Laszlo Nagy
Community Admin
Community Admin

I will report this to GS HQ.

....................................................................................................
Get Archicad Tips at https://twitter.com/laszlonagy
AMD Ryzen 1700X CPU, 48 GB RAM, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), WIN10 PRO ENG, AC20-AC25
Loving Archicad since 1995

Minh Nguyen
Graphisoft Moderator
Graphisoft Moderator

Hi Steve,

 

Thank you very much for sharing the report and I am very sorry for the issue!

 

To help with the investigation, I'm wondering if you can share a copy of the door in a MOD file? It's very easy to do:

 

1. Select the wall and the door in the Floor Plan.

2. Go to File > External Content > Save Selection as Module. A directory dialog box will appear, prompting you to save the selected elements as a module file.

 

This will help us a lot in finding out what causes the issue. Could you please help us with this?

Looking forward to hearing from you!

 

Best regards,

Minh

Minh Nguyen
Technical Support Engineer
GRAPHISOFT

Yes,  when I get the time to hunt down the file.  I just replace that door with a different style of door and all is well for now.  

ArchiCAD 25 5005 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro

Didn't find the answer? Start a new discussion

Labels

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!