Showing results for 
Search instead for 
Did you mean: 
Showing results for 
Search instead for 
Did you mean: 
Design forum

Help - Wall intersection

Not applicable
I'm working on a facade, and I'm making it all with wall

The problem is that they seem to intersect well in one direction and when they intersect in the other way the program automatically extends the wall.

I've checked the priority settings and I can't finde the problem.

I attach an image where you can see.

Thanks you very much.

Could one wall be slightly lower or higher than the others ?
ArchiCAD 4.5 --- 25 , Win 10 , dual monitors, 64 gb ram,Nvidia GeforceRTX 2080 TI, I-9


Sometimes I have been able to solve this by selecting one Wall and changing its Junction Order.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.

David Maudlin / Architect

Digital Architecture

AC26 USA • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.8GHz | 16 gb ram • OSX10.15.7

This my standard method to model the facades.
I put all the elements of the facade on a layer with a different intersection number so that the walls used to model cladding and the wall of the building enclosure don't connect each other.
AC 19 and AC21 latest hotfix
Win 10 Pro 64bit
Double XEON 14 CORES (tot 28 physical cores)
32GB RAM - SSD 256GB - Nvidia Quadro K620
Display DELL 25'' 2560x1440

I had a similar problem when trying to create a vertical interlock with the base of one complex profile passing below the top of another complex profile.
Apple iMac macOS Monterey / AC26UKI (most recent builds)

Didn't find the answer? Start a new discussion


Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!