Design forum
cancel
Showing results for 
Search instead for 
Did you mean: 

How to interconnect two elements which are generated by profile manager

Daniel_He
Contributor

There are two drainage pipe interconnect in 90 degree, how can I merge them together with pipe connection and surface smooth, not like connect in the picture;

Seeking help here from an Archicad beginer, thanks a lot

Snipaste_2021-09-27_20-13-35.png

Snipaste_2021-09-27_20-14-12.png

 

 

 

Daniel.He

ArchiCAD 25 3011 USA - Windows 11 Home 64x
Huawei Matebook16 R7-5800H 16G 512G SSD
1 ACCEPTED SOLUTION

Solution

As DGSketcher said, check your layer intersection number in the layer settings.

I think you will find it is set to 0 (zero) which means nothing in that layer will intersect/trim.

 

I just tried and got the same result you show.

 

Barry.


One of the forum moderators.
Versions 6.5 to 25
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 10

View solution in original post

11 REPLIES 11

JK88
Contributor

@Daniel_He If you are using the Beam tool to create the pipe connection, try changing the Beam tool "Geometry method" to "Chained" so this way your beam will stay connected as you go along. Hope this helps. 

Hi, thank you for helping, however I did it with "Chained", it showed as the picture

Daniel.He

ArchiCAD 25 3011 USA - Windows 11 Home 64x
Huawei Matebook16 R7-5800H 16G 512G SSD

Are they on the same layer? Are they on the same home story? Are you sure you have automatic connections activated for your view? I've never had my beans not connected by default.

AC 24, Twinmotion current, Windows 11, Msi 10UG with rtx 3070, wacom intuos pro m, Wacom Cintiq Pro 16, razer Tartarus pro.

DGSketcher
Virtuoso

Assuming the base lines intersect then check your Layer Intersection Group Number .

Apple iMac macOS Big Sur / AC24UKI (most recent builds)

Daniel_He
Contributor

I did it in basement level as designed for this element, drawed continouously in "Chained" in same layer, so these two elements should have the exact same attribute and should be automatic connection activated.

Daniel.He

ArchiCAD 25 3011 USA - Windows 11 Home 64x
Huawei Matebook16 R7-5800H 16G 512G SSD

DGSketcher
Virtuoso

What is the Layer Intersection Group Number for your "Pipes"?

Apple iMac macOS Big Sur / AC24UKI (most recent builds)

Solution

As DGSketcher said, check your layer intersection number in the layer settings.

I think you will find it is set to 0 (zero) which means nothing in that layer will intersect/trim.

 

I just tried and got the same result you show.

 

Barry.


One of the forum moderators.
Versions 6.5 to 25
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 10

View solution in original post

Hi, following your reply, I changed intersection No. from 0 to 1, the problem was solved, thanks a lot Barry and DGSketcher

Daniel.He

ArchiCAD 25 3011 USA - Windows 11 Home 64x
Huawei Matebook16 R7-5800H 16G 512G SSD

Barry Kelly
Moderator

Is there something on a hidden layer that is interfering?

 

Barry.


One of the forum moderators.
Versions 6.5 to 25
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 10

Daniel_He
Contributor

Here are two pictures about this profile, I don't see any hidden layer as I tried in a all new file

Snipaste_2021-09-28_12-27-25.pngSnipaste_2021-09-28_12-28-56.png

Daniel.He

ArchiCAD 25 3011 USA - Windows 11 Home 64x
Huawei Matebook16 R7-5800H 16G 512G SSD

Daniel_He
Contributor

It's solved. Thanks so much for helping got here, it's so helpful and efficient for a beginner to learn Archicad 

Daniel.He

ArchiCAD 25 3011 USA - Windows 11 Home 64x
Huawei Matebook16 R7-5800H 16G 512G SSD

Didn't find the answer? Start a new discussion

Labels

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!