Design forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Profiled Walls and Doors

vfrontiers
Contributor
Just wanted to point out that I've been less than enthusiastic about how PROFILED walls show in 2d.. Namely, I have always had issues that I simply CANNOT see doors placed in profiled walls...

Yesterday, a revelation came... I have (forever) used stories as a graphic MANAGEMENT tool and not a direct representation of vertical space.. So I have floors such as

Roof
Structure
Clerestory
Main Level

In a single story residence, each of these has a 0' HEIGHT TO NEXT...

By using 0' height stories, the mechanism for displaying windows and doors does not work.
I guess it never sees that floor plan cut plane...

I believe my concept is true and good to use the 0' Height to Next as I do want to have all my vertical dims based on FF for each of these stories... But I can see Graphisoft's need also..

Anyway, I just wanted to pass this along... I'll have to rethink my strategy for the next projects..

But if anyone knows how this can be circumvented, let me know.
Duane
Visual Frontiers
AC22 6021:|: AC24 4007:|: Enscape3:|:TwinMotion
DellXPS 4.7ghz i7:|: 8gb GPU 1070ti
2 REPLIES 2

Barry Kelly
Moderator
I guess because complex profile walls can not have 'Symbolic' floor plan display doesn't help - but it may have nothing to do with this at all.

I avoid the zero height storey situation by using more layers.
So my roof has its own layer and I simply turn on/off as required.
The same for clerestorey walls and windows, should you need a plan for these windows then just turn off the main wall layer and turn on the clerestorey layer.


Barry.

One of the forum moderators.
Versions 6.5 to 25
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 10

vfrontiers
Contributor
Barry..

I appreciate your answers.. Maybe I'm just too OLD school having created "work arounds" for how it USED TO BE...

I'm not opposed to your recommendations.. but the clerestory walls WILL BE AN ISSUE with cleanup..
Yes, I can mess with the layer priority numbers for 35 or 40 Layer Combos... but seems more appropriate (in my paradigm) to have it's own story... Note that my window schedules are set to show STORY... so having a window tagged with the CLERESTORY label is also helpful...

At this point, it's one of those crossroads... Make money or totally re-invent my paradigm... I'll have to "ease" into it at some point.

...

Actually, I was kind of hoping that GS had just made a choice about 0' height stories and it COULD BE reversed easily (or maybe they just didn't know it was a thing!)..
Duane
Visual Frontiers
AC22 6021:|: AC24 4007:|: Enscape3:|:TwinMotion
DellXPS 4.7ghz i7:|: 8gb GPU 1070ti

Didn't find the answer? Start a new discussion

Labels

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!