cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Design forum

Question on single plane roof / ramp

Anonymous
Not applicable
When I connect a ramp to a slab, the plane of the ramp is not aligned with the slab in 3D. (see the screenshot). It looks like that there is another slope perpendicular to the roof pitch. It's maybe because the two elements are not connected by a 90 degree angle but still I expect to see the two nodes at the same height.
1 ACCEPTED SOLUTION

Solution
anto_bg:

Check the angle of the Roof's Pivot Line (turned on via On-Screen View Options). Since the Roof and Slabs don't intersect in plan at a 90˚ angle, I think the Roof Pivot Line will need to be parallel to the intersection angle.

David
David Maudlin / Architect

www.davidmaudlin.com

Digital Architecture

AC26 USA • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.8GHz | 16 gb ram • OSX10.15.7

View solution in original post

2 REPLIES 2

Solution
anto_bg:

Check the angle of the Roof's Pivot Line (turned on via On-Screen View Options). Since the Roof and Slabs don't intersect in plan at a 90˚ angle, I think the Roof Pivot Line will need to be parallel to the intersection angle.

David
David Maudlin / Architect

www.davidmaudlin.com

Digital Architecture

AC26 USA • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.8GHz | 16 gb ram • OSX10.15.7

Anonymous
Not applicable
Thank you so much! Yes, the pivot line was in the root of the problem of the 3D model.

Didn't find the answer? Start a new discussion

Labels

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!