cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Design forum

What should I do if the wall connection is abnormal?

LeeJaeYoung
Advisor

What should I do if the wall connection is abnormal?

 

LeeJaeYoung_0-1654687313505.pngLeeJaeYoung_1-1654687324949.png

What should I study?

https://drive.google.com/file/d/158ynHLPPX5e80R6cT3n_r6ao9nTRd8Iu/view?usp=sharing

AC25 5010 on window 11
1 ACCEPTED SOLUTION

Solution

Hello LeeJaeYoun,

 

Here is some image of the principle of a custom post to join 4 walls.

Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 25 FRA FULL

OS 11.6 Big Sur - MacBook Pro 2015 - 16Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin

View solution in original post

12 REPLIES 12

Hello LeeJaeYoung,

 

Despite moving the reference lines of each wall (in pairs), I did not manage to create a perfect match and I came to a radical and effective solution. I make a personalized column profile on which the 4 walls are connected without crossing.

Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 25 FRA FULL

OS 11.6 Big Sur - MacBook Pro 2015 - 16Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin

I don't quite understand.
I would appreciate it if you could show me a more detailed explanation or image.

AC25 5010 on window 11

Solution

Hello LeeJaeYoun,

 

Here is some image of the principle of a custom post to join 4 walls.

Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 25 FRA FULL

OS 11.6 Big Sur - MacBook Pro 2015 - 16Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin

thank you ^^

What you're saying is that it's good to have a complex column at the joint point.
Is this the default way in Archicad?
With columns and walls ...solve all planes.

May I ask you one more question?
How do you deal with liquid waterproofing and wallpaper?
I'm thinking of treating the liquid waterproofing with Morph.
However, I am thinking about what to do with the wallpaper.

AC25 5010 on window 11

Hello,

 

"What you're saying is that it's good to have a complex column at the joint point."

You are right but what I am saying is to get a solution about your request 😉

Please note that it is nevertheless necessary to plan to modify the classification of the connection column. It is not a column but a wall which must therefore be exported as type ifcwall.

 

"Is this the default way in Archicad?"

I do not think so ! It is mine for sure.


"How do you deal with liquid waterproofing and wallpaper?"
I use SEO to get watter into a gsm object about a pool or watter into a mesh to get a pond.

 

About wallpaper I only use model tab like below but you are able to use morph too.

Capture d’écran 2022-06-12 à 11.17.33.png

Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 25 FRA FULL

OS 11.6 Big Sur - MacBook Pro 2015 - 16Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin

Thank you so much

AC25 5010 on window 11

I'll ask you one more question ^^
How do I get the concrete face treatment process to appear on the schedule?
Concrete Face Treatment: To level the concrete surface by grinding the concrete surface.

AC25 5010 on window 11

LeeJaeYoung,

 

I am not able tu understand your request with my poor english 😕

Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 25 FRA FULL

OS 11.6 Big Sur - MacBook Pro 2015 - 16Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin

In the construction process, in Korea, there is a process of applying mortar on the concrete interior surface and tile it, and in some cases, the concrete interior surface is ground and cleaned.

(a process of grinding and cleaning the concrete surface with a grinder to flatten it)
Then you have to specify something on the interior surface of the concrete...

 

LeeJaeYoung_0-1655083936738.png

I asked you because I was wondering if it's okay to do it with zero or if you're doing it in a different way.

AC25 5010 on window 11

Hello,

 

"I asked you because I was wondering if it's okay to do it with zero or if you're doing it in a different way."

Personally, if a material has a layer of zero thickness, then I do not represent it because it will be invisible at 1/50 and I can differentiate the final appearance of a wall by other means.

Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 25 FRA FULL

OS 11.6 Big Sur - MacBook Pro 2015 - 16Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin

Sorry to keep asking.
Question 1. I'm curious to know how to deal with content that is specific to the building process and process it in the schedule.
A thickness of 0 is the process the workers work in, and it has nothing to do with the shape.
Since it is surface that count, I am curious to know how you do it.

I used translate.google.com ^^

AC25 5010 on window 11

Didn't find the answer? Start a new discussion

Labels

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!