cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Design forum

Forum Posts

Archicad 12 - 3D Documentation Tool

So we are considering turning out all of our wall sections.. as section perspectives using the 3d document tool.... Has anyone found a way to tag the location of the 3d document cut in plan as a live link??

Anonymous by Not applicable
  • 2604 Views
  • 5 replies
  • 0 likes

Stair Maker

In archicad 12 the option for editing a stair which you have created has moved from its spot in AC11. In 11 next to the create stair button within the Stair Selection Settings there was a small arrow that looks like a play button. When selecting the ...

Anonymous by Not applicable
  • 6527 Views
  • 12 replies
  • 0 likes

Roof lines showing in floor plans - a bit messy?

Been playing with the roof tools today and come across this issue that I cant seem to find away to fix. Im working on the ground floor, and have part of my roof above on the first floor (one story above). Iv built the roof, all on the same heights, a...

Anonymous by Not applicable
  • 5465 Views
  • 4 replies
  • 0 likes

Hotlinking Working drawing models to a 3D Space

Hi wr1nkles If, as your signature suggests, you are still on AC9, you must hotlink one storey at a time. From 11 onwards you can use Multi-storey hotlinks (with the limitation that they all have the same storey settings) Upon second reading this migh...

Anonymous by Not applicable
  • 2899 Views
  • 4 replies
  • 0 likes

sloping roofs

working in AC11 , i have a house design that is 2 separate buildings each building is on different ground levels. i have stairs connecting the 2 buildings on the outside of the house and now want to create a covered walk way from one building to the ...

Anonymous by Not applicable
  • 1343 Views
  • 2 replies
  • 0 likes

Roof Surfaces: Standing Seam, Corrugated metal . . .

Aloha I cannot find the tool to create 3d corrugated roofs, standing seam et al. I used it a while back, it had lots of controls, height and spacing of seams It worked on all sorts of hip roofs. many thanks for directing me to that magic button. dean...

Anonymous by Not applicable
  • 3117 Views
  • 5 replies
  • 0 likes

Window/doors do not show in Custom Profile Wall

I have created a custom profile wall. Simply perpendicular but with soffit, framing etc. The windows and doors disappear in plan. They convert to a blue dot? I'm not sure what I've done incorrectly. I'm in Arch 10 on a mac. Thanks, Kurt

Anonymous by Not applicable
  • 9859 Views
  • 26 replies
  • 0 likes

ok what did I do.......

All right I have two computers and I try to keep exact copies the project folders on both machines. I do this wirelessly through a couple of airport extreme base stations. I have been doing this for a while with no problems, until the other day upon ...

Screenshot_1.jpg
Anonymous by Not applicable
  • 1690 Views
  • 3 replies
  • 0 likes

Moving objects to other stories..

I have drawn a set of beams at second floor level, but when I move them to the correct position in the section view, they move automatically to the first floor plan. Any ideas on how to 'link' them to the second floor plan so they are not visible on ...

Anonymous by Not applicable
  • 1810 Views
  • 4 replies
  • 0 likes

Didn't find the answer? Start a new discussion

Labels