cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Design forum

stair and wall/slab cross-section

Bara3
Booster

Hello, I have tried to have clear connection between a wall and a stair, I used the same material but it is not working. Can you please help me what am I doing wrong?

 

Bara3_0-1654326218029.png

 

1 ACCEPTED SOLUTION

Solution

If there is a deadline, you have to do SEO.

LeeJaeYoung_0-1654332309124.png

If the material is different, it will not connect.

LeeJaeYoung_1-1654332405628.png

 

LeeJaeYoung_2-1654332444771.png

If you match the material

LeeJaeYoung_3-1654332480428.png

And when asking a question, you need to provide basic information.
If it is the connection between the stairs and the wall like this time, it seems that it will be easier to answer the information about the wall and the stairs if you tell them with pictures as much as possible.

 

AC25 5010 on window 11

View solution in original post

4 REPLIES 4

LeeJaeYoung
Advisor

Isn't there a finish on the wall?
Then you have to use SEO.

AC25 5010 on window 11

There is not, it is just a plain wall. 

I thought that a finish might be a problem, but it would be great to connect it also when there a finish on the wall. 

It seems that the wall and the stairs are not connected correctly.

AC25 5010 on window 11

Solution

If there is a deadline, you have to do SEO.

LeeJaeYoung_0-1654332309124.png

If the material is different, it will not connect.

LeeJaeYoung_1-1654332405628.png

 

LeeJaeYoung_2-1654332444771.png

If you match the material

LeeJaeYoung_3-1654332480428.png

And when asking a question, you need to provide basic information.
If it is the connection between the stairs and the wall like this time, it seems that it will be easier to answer the information about the wall and the stairs if you tell them with pictures as much as possible.

 

AC25 5010 on window 11

Didn't find the answer? Start a new discussion

Labels

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!